Skip to content
You are here:
10/100 Base FC 20km Copper Fiber Converter
This 10/100 base FC 20km copper fiber converter can convert Optical－Electric Ethernet signals between 10/100M UTP interface (TX) and 100M optical fiber interface (FX). This copper fiber converter use dual FC optical port and its max working distance is 20km over single mode optical fiber. Other models available for different optical ports and working distance.

10/100 base FC 20km copper fiber converter Main features
Auto negotiation function allows UTP port to auto select 10M or 100M, and Full Duplex or Half Duplex.
UTP port supports auto MDI-MDIX function.
Supports link fault pass through (LFP) function: When optical fiber or UTP is at fault, the converter could stop the entire link, in addition to power light, other LED will be off.
Optical Transceiver: FC, single mode double fiber.
Supports 1600 bytes packet.
Converter working mode could be chosen: Store and forward mode, modified cut through mode, or pure converter mode.
Internal IC of prevented thunderbolt could greatly reduce damage of the converter caused by thunderbolt induction.
Internal or External switching power: for users to choose.
 
10/100 base FC 20km copper fiber converterTechnical Specifications
Operating standards：IEEE802.3u、10/100Base-TX and 100Base-FX；
MAC addresses table: 1K
Data buffer: Built-in 128Kb RAM.
Connectors: UTP Connector: RJ-45, 10/100Mbps; Fiber Connector: FC, 100Mbps
Cable: UTP: Cat. 5 (the max distance up to 100m)
Single mode Fiber: 8/125, 8.7/125, 9/125, 10/125μm（the max distance up to 20 km）
Flow Control: Full Duplex: Supporting standard IEEE802.3x
             Half duplex: back pressure
LED: Power, FX SD, FX Link/Act, and TX 100, TX FDX, TX Link/Act.
Power Requirement: AC 100 ～ 240V, 50-60Hz; DC 5V, 1A.
Ambient temperature: 0 ～ 50℃；Storage temperature：-20℃ ～ 70℃
Humidity: 5% ～ 90%
 

Get a quick quote

Please use this  Contact Form or write to sales@huihongfiber.com, we will reply as soon as possible.