|10 100 Base SC Multimode Fiber Optic Ethernet Converter|
The 10/100 base SC multimode fiber optic Ethernet converter can convert Optical－Electric Ethernet signals between 10/100M UTP interface (TX) and 100M optical fiber interface (FX). This fiber optic Ethernet converter use SC optical interface and its max working distance is 2km over multimode optical fiber. Other models available for different optical ports and working distance.
10/100 base SC multimode fiber optic Ethernet converter Main features
Auto negotiation function allows UTP port to auto select 10M or 100M, and Full Duplex or Half Duplex.
UTP port supports auto MDI-MDIX function.
Supports link fault pass through (LFP) function: When optical fiber or UTP is at fault, the converter could stop all the link, in addition to power light, other LED will be off.
Optical Transceiver could be chosen: SC multimode double fiber.
Supports 1600 bytes packet.
Converter working mode could be chosen: Store and forward mode, modified cut through mode, or pure converter mode.
Internal IC of prevented thunderbolt could greatly reduce damage of the converter caused by thunderbolt induction.
Internal or External switching power: for users to choose.
10/100 base SC multimode fiber optic Ethernet converter Technical Specifications
Operating standards：IEEE802.3u、10/100Base-TX and 100Base-FX；
MAC addresses table: 1K
Data buffer: Built-in 128Kb RAM .
Connectors: UTP Connector: RJ-45, 10/100Mbps; Fiber Connector: SC100Mbps
Cable: UTP: Cat. 5 (the max distance up to 100m)
Multimode Fiber: 50/125, 62.5/125μm（the max distance up to 2km or 5km）
Flow Control: Full Duplex: Supporting standard IEEE802.3x
Half Duplex: back pressure
LED: Power, FX SD, FX Link/Act, TX 100, TX FDX, TX Link/Act.
Power Requirement: AC 100 ～ 240V, 50-60Hz; DC 5V, 1A.
Ambient temperature: 0 ～ 50℃；Storage temperature：-20℃ ～ 70℃
Humidity: 5% ～ 90%
SNMP Managed Fiber Media Converter
SNMP Managed Ethernet Media Converter enable user to monitor the working status of the converter and to inspect the connection type status as well as to configure system parameters. SNMP managed fiber optic media converters are used in the chassis, they are pluggable type into the media converter chassis, the converter types can be single mode or multimode, single fiber WDM fiber optic media converter or common dual fiber types, they are designed with redundancy power supply. This type converter is used with our Netriver softwares.
10/100M Fiber Media Converter
We supply 10 100 converter both dual fiber type and single fiber type. these 10 100 media converter are economic and convenient to use as copper to fiber devices in 10 100 Ethernet. The 10 100 dual fiber converters have single mode type and multimode type, they are the most commonly used converters and they are cheap. The 10 100 single fiber converters have only single mode type and this converter use WDM technology to transmit and receive signal via the same optical fiber.
Gigabit converter is available both single mode type and multimode type, these 1000 converters are used in Gigabit Ethernet as copper to fiber conversion equipment. Our single mode Gigabit converter transmission distance from 10km up to 70km optional, multimode Gigabit converter transmission distance is 224 meters for 62.5/125 fiber, or 550 meters for 50/125 fiber. The 1000 converter meet the requirement to use in high-speed high stability 1000M Ethernet.
10/100/1000 Fiber Media Converter
The 8 channel fiber optic video transmitter accepts 8 composite video baseband signals via video BNC ports. It then performs a 10-bit linear analog-to-digital conversion on the baseband video signals, multiplexes the resulting PCM data, transmits the data optically via an optical fiber to the de-multiplexer.
Single Mode to Multimode Converter
Single mode multimode converters are simple and stable equipment to connect multimode fiber traffic to single mode fiber devices and links.We have 100 base and 1000 base single mode to multimode converters, these bi-directional converters could be used individually to connect 100Base-FX or 1000Base-FX multimode devices to accordingly singlemode devices, or in pairs at each end of long-distance single mode fiber links.These Converters offer perfect solution dispersed networks where media conversion required between multimode segments separated by long distances.
Media Converter Chassis
Media converter chassis is mainly used to manage the various media converters, all the converters plugged into the chassis will share same power supply, so that they are easy to manage. We have the 14 slot media converter chassis and 16 slot media converter chassis. 14 slot type media converter chassis could use stand alone type converter to plug into it, 16 slot media converter chassis use is slot type converter to plug into it. All converters used with chassis are hot pluggable.
SFP Fiber Media Converter
We are supplier of SFP Ethernet media converters, gigabit SFP fiber optic media converters,10/100M and 10/100/1000M types available. This converter can be used with different types of SFP transceivers.
|Fiber Optic Patch Cord|
|Armored Fiber Patch Cord|
|OM3 10G Fiber Patch Cable|
|Mode Conditioning Cable|
|Ribbon Fiber Patch Cables|
|Multi Fiber Cable Assemblies|
|Waterproof Cable Assemblies|
|Fiber Optic Pigtail|
|Fiber Optic Splitter|
|Fiber Optic Loopbacks|
|Fiber Optic Connector|
|Fiber Optic Adapter|
|Fiber Optic Attenuator|
|Indoor Fiber Optic Cables|
|Outdoor Fiber Optic Cables|
|Fiber Cable Management|
|SFP Transceiver Module|
|SFP Plus Transceiver|
|GBIC Transceiver Module|
|1X9 Fiber Optic Transceiver|
|Fiber Video Transceiver|
|Fiber Optic Converter|