SUNM02/SUNS02 series USB powered fiber to copper media converters can convert optical－electric Ethernet signals between 10/100M UTP interface (TX) and 100M optical fiber interface (FX). 

It can extend traditional 10/100M fast Ethernet to the distance of 120km through optical fiber link. It possesses stable performance and good quality by adopting latest IC packages from USA and Taiwan. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe network operation. SUNM02/SUNS02 series external power supply fiber to copper converters could be used alone, or inserted to 14 slots converters rack supplied by G.T Crop. It is suitable for the use of Network Centre. SUNM02/SUNS02 series huihongfiber.com fiber to copper media converters can support USB power supply, which make fiber to table more convenient. Having 5 DIP switch, SUNM02/SUNS02 fiber to copper converters make customer easier to manage the items.

SUNM02/SUNS02 USB powered fiber to copper media converters Main features
Auto negotiation function allows UTP port to auto select 10M or 100M, and Full Duplex or Half Duplex.
UTP port supports MDI/MDI-X auto crossover.
LFP (Link Fault Pass-through): When optical fiber or UTP is at fault, the converter could stop the entire link.
Multiple optical transceivers could be chosen: SC, ST or FC, single mode / multimode
Supporting 1600 bytes packet for management  
Converter working mode could be chosen: Store and forward switch mode, Modified cut-through switch mode, or Converter mode.
Internal Circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
Internal or External switching power: for users to choose.
DIP SWITCH
      Switch     Function     Switch      Function
Switch 1      Auto      UTP Nway      Force      UTP optional
Switch 2      100      UTP 100M      10      UTP 10M
Switch 3      FDX      UTP Full Duplex      HDX      UTP Half Duplex
Switch 4      LFP      LFP available      LFP DIS      LFP Not available
Switch 5      FDX      Optical Full Duplex      HDX－FX      Optical Half Duplex
 
SUNM02/SUNS02 USB powered fiber to copper media converters Technical Specifications
Operating standards：IEEE802.3u、10/100Base-TX and 100Base-FX；
MAC addresses table: 1K
Data buffer: Built-in 128Kbyte RAM.
Connectors: UTP Connector: RJ-45, 10/100Mbps; Fiber Connector: ST/SC/FC, 100Mbps
Cable:
UTP: Cat. 5 (the max distance up to 100m)
Fiber ( Multimode): 50/125, 62.5/125μm（the max distance up to 2km or 5km）
Fiber ( Single mode): 8.3/125, 8.7/125, 9/125, 10/125μm（the max distance up to 20 -120km）
Flow Control
Full Duplex: Supporting standard IEEE802.3x
Half duplex: back pressure
LED: Power, FX SD, FX Link/Act, TX 100, TX FDX, TX Link/Act.
Power Requirement: External Power supply    Input: 85-245VAC 50Hz or DC 48V, Output 5VDC 1A,  USB power supply is 5VDC 0.5A.
Ambient Temperature: 0 ～ 70℃
Humidity: 5 ～ 90%
Dimensions:
External power:  26×70×93mm

SNMP Managed Fiber Media Converter
SNMP Managed Ethernet Media Converter enable user to monitor the working status of the converter and to inspect the connection type status as well as to configure system parameters. SNMP managed fiber optic media converters are used in the chassis, they are pluggable type into the media converter chassis, the converter types can be single mode or multimode, single fiber WDM fiber optic media converter or common dual fiber types, they are designed with redundancy power supply. This type converter is used with our Netriver softwares.

10/100M Fiber Media Converter
We supply 10 100 converter both dual fiber type and single fiber type. these 10 100 media converter are economic and convenient to use as copper to fiber devices in 10 100 Ethernet. The 10 100 dual fiber converters have single mode type and multimode type, they are the most commonly used converters and they are cheap. The 10 100 single fiber converters have only single mode type and this converter use WDM technology to transmit and receive signal via the same optical fiber.

Gigabit Converter
Gigabit converter is available both single mode type and multimode type, these 1000 converters are used in Gigabit Ethernet as copper to fiber conversion equipment. Our single mode Gigabit converter transmission distance from 10km up to 70km optional, multimode Gigabit converter transmission distance is 224 meters for 62.5/125 fiber, or 550 meters for 50/125 fiber. The 1000 converter meet the requirement to use in high-speed high stability 1000M Ethernet.

10/100/1000 Fiber Media Converter
The 8 channel fiber optic video transmitter accepts 8 composite video baseband signals via video BNC ports. It then performs a 10-bit linear analog-to-digital conversion on the baseband video signals, multiplexes the resulting PCM data, transmits the data optically via an optical fiber to the de-multiplexer.

Single Mode to Multimode Converter
Single mode multimode converters are simple and stable equipment to connect multimode fiber traffic to single mode fiber devices and links.We have 100 base and 1000 base single mode to multimode converters, these bi-directional converters could be used individually to connect 100Base-FX or 1000Base-FX multimode devices to accordingly singlemode devices, or in pairs at each end of long-distance single mode fiber links.These Converters offer perfect solution dispersed networks where media conversion required between multimode segments separated by long distances.

Media Converter Chassis
Media converter chassis is mainly used to manage the various media converters, all the converters plugged into the chassis will share same power supply, so that they are easy to manage. We have the 14 slot media converter chassis and 16 slot media converter chassis. 14 slot type media converter chassis could use stand alone type converter to plug into it, 16 slot media converter chassis use is slot type converter to plug into it. All converters used with chassis are hot pluggable.

SFP Fiber Media Converter
We are supplier of SFP Ethernet media converters, gigabit SFP fiber optic media converters,10/100M and 10/100/1000M types available. This converter can be used with different types of SFP transceivers.