OM1 62.5/125um Multimode MPO to LC ( High Density) Fiber Optic Patch Cable, with Pull Tab Connector - Orange

MPO-HD to LC-HD (High Density ) fiber patch cable is characterized in that the Push-Pull tab connector can be removed using a simple pull tab, it eliminates the need for finger access to the MPO and LC connectors release mechanism, in dense applications.

This cable allow high-density connections between network equipment in telecommunication rooms, and supporting the precise optical performance requirements for 40GbE/100GbE and improving network performance, it is ideal for patching high density blade servers, patch panels and equipment.

MPO-LC HD Cable Structure

The figure above is 12 Fiber 12 Strand MPO to Duplex LC HD Push Pull Tab Connector Harness Cable.

a:Push_Pull Tab
Allowing for the connector to be disengaged easily from densely loaded panels or equipment without any special tools.Allow adaptors to be stacked with absolutely no vertical space, and reduced by 40 % resulting in space savings.
b:Male (Pin)
The male connector should be used together with Female connector.
c:MPO Connector
The MPO connector is composed of 12 Strand and 24 Strand.
d:LC Connector
The LC connector type can be made into duplex and simplex.
e:LSZH Jacket
This material with high safety grade and Low Smoke Zero Halogen.
f:Separator
This device safely separated the MPO 12 fibers to 6 x duplex LC connector/12 x simplex LC connector.

The Density of HD Connector VS Conventional Connector

The left is HD Push_Pull connector, the right is conventional connector.

MPO fiber patch connectors utilize precision molded MT ferrules, with metal guide pins and precise housing dimensions to ensure fiber alignment when mating. The MPO fiber cable can be mass terminated in combinations of 4, 8, or 12 to 144 fiber ribbon or round cables.

MPO HD fiber cable Applications:
Patch cords and Fan-Out assemblies
ATM & DWDM high speed communication systems
Multimedia
CATV and Video
Data and Telecommunication Networks
Industrial