Fiber Drop Cable

The fiber drop cable family covers the last connection in an FTTH network, from the distribution point or terminal closure to the subscriber outlet. Every assembly is built on Corning G.657.A2 bend-insensitive single-mode glass with a 7.5mm fiber bend radius, terminated with SC APC connectors polished to UPC-grade geometry, and 100% tested for insertion loss of 0.3dB maximum and return loss of 60dB minimum before packing. The flat SC APC to SC APC version suits standard indoor and short outdoor drops, while the hardened versions carry IP68-rated connectors that mate directly with outdoor terminal ports and survive moisture, dust and repeated reconnection in the field. All versions are manufactured to the ordered length, from short riser links to long rural drops.

Standard Flat Drop Cables

SC APC to SC APC Fiber Drop Cable, OS2
Flat 2.0x5.0mm LSZH drop jumper with SC APC both ends, 400N tensile, G.657.A2 glass, custom length.

Hardened IP68 Drop Cables

Hardened SC APC to SC APC Fiber Drop Cable, OS2, IP68
One IP68 hardened SC APC end for the outdoor terminal port, standard SC APC at the indoor end, custom length.

Hardened SC APC to Hardened SC APC Fiber Drop Cable, OS2, IP68
IP68 hardened SC APC both ends on a round 5.0mm cable, 1200N tensile, for terminal-to-terminal outdoor runs, custom length.

All drop cables in this family are custom-length products: the cable is cut, terminated and tested to the route length stated with the order. For connector combinations, jacket printing, labeling or pulling-eye options beyond the listed configurations, send the project requirement through the contact form and the factory will confirm the manufacturable specification with the quotation.