Multifiber Cables

The multifiber cable family covers pre-terminated trunk assemblies for indoor and indoor/outdoor backbone links. Instead of pulling a dozen individual cords, one assembly carries up to 48 fibers and fans out into connectorized legs at each end - every leg polished, inspected and optically tested at the factory before dispatch. Connector choices span LC, SC, FC, ST and LSH in UPC or APC polish, with fiber counts from 1 to 48 depending on the construction, and standard lengths from 1m (3ft) to 30m (98ft) with customized lengths beyond the list. Indoor constructions use tight-buffered breakout, bunch or flat geometries on flame-rated jackets; the indoor/outdoor constructions add moisture and ultraviolet tolerance so a single assembly can run from an outdoor entry point directly into the building without a transition splice. Every cable is manufactured to the ordered configuration and tested leg by leg for insertion loss and return loss before packing.

Indoor Multi-Fiber Cables

LC UPC to LC UPC Duplex OS2 OFNR 24F Indoor Breakout Cable
Factory-built 24-fiber OS2 riser (OFNR) trunk, duplex LC UPC legs both ends, stocked 2m and 10m plus custom builds.

Customized OM1/OM2 Indoor Multi-Fiber Breakout Cable, LC/SC/FC/ST/LSH/Unterminated
OM1/OM2 legacy multimode indoor trunk for installed systems, 4 to 24 fibers, custom length.

Customized OS2 Indoor Multi-Fiber Breakout Cable, LC/SC/FC/ST/LSH/Unterminated
OS2 9/125 single-mode indoor trunk, tight-buffered 2.0/0.9mm breakout legs, 4 to 48 fibers, custom length.

Customized OS2 Indoor Multi-Fiber Bunch Cable, LC/SC/FC/ST/LSH, 0.9/2.0mm Breakout
OS2 indoor bunch construction, 2 fibers with 0.9/2.0mm breakout, flexible round trunk, custom length.

Customized OS2 Indoor Multi-Fiber Flat Cable, LC/SC/FC/ST/LSH, 1.6mm Breakout
OS2 indoor flat construction, 2 fibers with 1.6mm breakout, low-profile trunk for shallow channels, custom length.

Customized OM5 Indoor Multi-Fiber Breakout Cable, LC/SC/FC/ST/LSH/Unterminated
OM5 wideband multimode indoor trunk for SWDM links, 4 to 24 fibers, custom length.

Customized OM3 Indoor Multi-Fiber Breakout Cable, LC/SC/FC/ST/LSH/Unterminated
OM3 multimode indoor trunk matching existing plants, 4 to 24 fibers, custom length.

Customized OM4 Indoor Multi-Fiber Breakout Cable, LC/SC/FC/ST/LSH/Unterminated
OM4 multimode indoor trunk for 10/25/40/100G halls, 4 to 48 fibers, custom length.

Indoor/Outdoor Multi-Fiber Cables

Customized OM3 Indoor/Outdoor Multi-Fiber Cable, LC/SC/FC/ST/Unterminated
OM3 indoor/outdoor dual-rated trunk, 2 to 24 fibers, custom length.

Customized OS2 Indoor/Outdoor Multi-Fiber Cable, LC/SC/FC/ST/Unterminated
OS2 indoor/outdoor dual-rated trunk, 1 to 24 fibers, one assembly from entry point to rack, custom length.

Customized OM2 Indoor/Outdoor Multi-Fiber Cable, LC/SC/FC/ST/Unterminated
OM2 indoor/outdoor dual-rated trunk for legacy plants, 4 or 8 fibers, custom length.

Customized OM4 Indoor/Outdoor Multi-Fiber Cable, LC/SC/FC/ST/Unterminated
OM4 indoor/outdoor dual-rated trunk, 2 to 24 fibers, custom length.

All multifiber cables in this family are built to order: state the fiber mode, fiber count, connector pair, breakout geometry and route length with the enquiry, and the factory confirms the manufacturable specification with the quotation. Pulling eye, labeling, jacket printing and project packaging options are available for rollout programs.