Ciena 180-3580-900 Compatible 400G QSFP-DD Transceiver Module

The 180-3580-900 compatible module is intended for Ciena platforms requiring a 400G QSFP-DD transceiver. It specifies wavelength 1528.77nm-1567.13nm, reach ＞500km with Duplex LC/UPC through SMF.

OEM Part Number: 180-3580-900HT Part Number: 180-3580-900

Product Highlights

• Compatible alternative to Ciena 180-3580-900
• 400G connectivity at 100/200/400 Gbps
• Optical wavelength: 1528.77nm-1567.13nm
• Specified reach: ＞500km
• Duplex LC/UPC / SMF interface
• Digital diagnostic monitoring: Supported
• Operating temperature: 0℃ to 75°C

This coherent interface is suited to data-center interconnect, metro transport and managed DWDM links where the host platform supports the stated modulation and FEC modes. Design the optical line around the actual launch power, receiver range, OSNR requirement and span loss; the stated reach is not a substitute for a link-budget calculation. Use matching coherent modules and the appropriate DWDM channel plan at both ends.

Before deployment, check the host port type, supported data rate and firmware requirements. The 400G interface configuration must match the remote equipment; sharing a QSFP-DD housing alone does not make two transceiver types interoperable.

The module is programmed for equipment that recognizes the 180-3580-900 part number. Before shipment, we check EEPROM identification, link establishment and diagnostic readouts, then verify transmit and receiver performance against the stated optical specifications. Host hardware and software revisions can affect third-party module acceptance, so customers can provide the switch model and software release for a compatibility check before ordering.

Quote HT part number 180-3580-900 together with OEM part number 180-3580-900 and the required quantity. Standard modules use our factory label; neutral labels, customer-branded packaging and project-specific compatibility coding are available on request. For mixed-brand installations, select the corresponding brand-specific page instead of assuming one EEPROM version fits every platform.

Each unit undergoes optical performance checks, compatibility verification and visual inspection before packing. Modules are supplied in protective blister trays or anti-static packaging and then cartoned for transport. Custom labels and project packing lists can be added for volume orders.

Standard products normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.