Brocade 40G-QSFP-4SFP-AOC-3001 Compatible 40G QSFP+ to 4 x 10G SFP+ Active Optical Breakout Cable, 30m (98ft)

The 40G-QSFP-4SFP-AOC-3001 cable offers a direct QSFP+ to 4 SFP+ connection at 40Gbps. Its 30m (98ft) length and AOC construction are intended for Brocade equipment, with no separate transceiver-and-patch-cord assembly required.

OEM Part Number: 40G-QSFP-4SFP-AOC-3001HT Part Number: 40G-QSFP-4SFP-AOC-3001

Product Highlights

• Compatible alternative to Brocade 40G-QSFP-4SFP-AOC-3001
• 40G connectivity at 40Gbps
• Interface configuration: QSFP+ to 4 SFP+
• Fixed length and part number: 30m (98ft), 40G-QSFP-4SFP-AOC-3001
• Minimum bend radius: 30mm

This assembly uses OFNP jacket, minimum bend radius 30mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The extended 30m (98ft) reach supports connections across adjacent racks or between separated equipment rows. Secure the cable along its route, protect both ends from pull loads and preserve ventilation. The integrated AOC construction avoids a chain of separate modules and patch leads.

40G-QSFP-4SFP-AOC-3001 is the longest of 10 verified length options in this family. Compared with 40G-QSFP-4SFP-AOC-2501 at 25m (82ft), it provides 5m of additional reach for a longer vertical drop, a wider rack or an adjacent-cabinet route. Confirm that the complete path requires this length, because unused slack still needs supported, bend-safe storage.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include 10G/40Gigabit Ethernet or Fibre Channel. Confirm that the host firmware and port configuration support the same operating mode.

The QSFP+ to 4 SFP+ configuration divides the high-speed interface into multiple lower-speed connections. Verify the upstream lane assignment, downstream port speeds and breakout setting on the host before connecting the assembly. Each branch must attach to the correct remote interface.

The optical engines and fiber are permanently integrated into this AOC. There are no detachable optical modules to clean or exchange. Handle the complete assembly by its connector housings and cable, and keep both ends matched to the same interface specification.

The HT cable carries the compatibility configuration associated with 40G-QSFP-4SFP-AOC-3001, while its mechanical assembly remains the fixed 30m (98ft) version described here. Incoming inspection, connector examination and a live link test are completed before packing. Customers with unusually old or new Brocade software can request a pre-order check.

Use part number 40G-QSFP-4SFP-AOC-3001 for the 30m (98ft) assembly. For mixed-length projects, list each required part number and quantity separately so that every cable can be tested and packed according to its intended installation.

Every 40G-QSFP-4SFP-AOC-3001 compatible assembly undergoes link testing, compatibility verification and visual inspection. The 30m (98ft) cable is coiled without exceeding its minimum bend radius, fitted with connector protection and packed in an anti-static bag or protective tray before cartoning. Project labels and packing lists are available for volume orders.

Available stock is usually packed and handed to the carrier within one to three working days. Delivery can be arranged by international express, air cargo or sea freight, with tracking details supplied after dispatch. Freight-collect shipments and delivery to a customer warehouse or forwarder can also be coordinated.