Brocade 40G-QSFP-C-0501 Compatible 40G QSFP+ Passive Copper Cable, 5m (16ft)

With a fixed 5m (16ft) cable and QSFP+ to QSFP+, the 40G-QSFP-C-0501 compatible assembly simplifies 40G deployment. It is manufactured and tested by HT for Brocade equipment.

OEM Part Number: 40G-QSFP-C-0501HT Part Number: 40G-QSFP-C-0501

Product Highlights

• Compatible alternative to Brocade 40G-QSFP-C-0501
• 40G connectivity at 40Gbps
• Interface configuration: QSFP+ to QSFP+
• Fixed length and part number: 5m (16ft), 40G-QSFP-C-0501
• Conductor specification: 26AWG
• Minimum bend radius: 40mm

This assembly uses 26AWG conductors, PVC (OFNR) jacket, minimum bend radius 40mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include SFF-8436, QSFP+ MSA and IEEE 802.3ba. Confirm that the host firmware and port configuration support the same operating mode.

A passive DAC has no separate optical conversion stage. Its low-power, low-latency operation is useful for short equipment links, but the assembly must remain within the length and signaling mode accepted by both hosts.

The 5m (16ft) length gives 40G-QSFP-C-0501 more freedom for adjacent-rack and row-end deployments. Longer copper runs need particular attention to routing weight and bend control; the DAC specification and host support must still match the intended link.

40G-QSFP-C-0501 occupies the middle of this family between 40G-QSFP-C-0301 at 3m (10ft) and 40G-QSFP-C-0701 at 7m (23ft). It adds 2m over the shorter option for extra routing clearance, while the next longer version adds another 2m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

Compatibility is more than matching the QSFP+ to QSFP+ shape. This assembly is prepared for hosts expecting 40G-QSFP-C-0501 and is checked for identification, stable link behavior and electrical continuity, link stability and diagnostic readouts. We recommend confirming the equipment model and software release for critical deployments or mixed-vendor installations.

When ordering, specify 40G-QSFP-C-0501, cable length 5m (16ft) and the host platform. This allows our team to verify both the physical assembly and the compatibility requirement before production. Neutral labeling and customer packing lists can be arranged for volume orders.

Every 40G-QSFP-C-0501 compatible assembly undergoes link testing, compatibility verification and visual inspection. The 5m (16ft) cable is coiled without exceeding its minimum bend radius, fitted with connector protection and packed in an anti-static bag or protective tray before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.