Extreme Networks 40GB-C10-QSFP Compatible 40G QSFP+ Active Copper Cable, 10m (33ft)

This HT cable matches the 40GB-C10-QSFP requirement for Extreme Networks equipment. The 10m (33ft) assembly supports 40G operation and provides an actively conditioned copper link for the stated high-speed interface; its complete electrical and mechanical details are listed below.

OEM Part Number: 40GB-C10-QSFPHT Part Number: 40GB-C10-QSFP

Product Highlights

• Compatible alternative to Extreme Networks 40GB-C10-QSFP
• 40G connectivity at 40Gbps
• Interface configuration: QSFP+ to QSFP+
• Fixed length and part number: 10m (33ft), 40GB-C10-QSFP
• Conductor specification: 26AWG
• Minimum bend radius: 40mm

This assembly uses 26AWG conductors, PVC (OFNR) jacket, minimum bend radius 40mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include 40G InfiniBand 8x DDR, 4x QDR, 10G/40Gigabit Ethernet, Fibre Channel. Confirm that the host firmware and port configuration support the same operating mode.

The extended 10m (33ft) reach supports connections across adjacent racks or between separated equipment rows. Secure the cable along its route, protect both ends from pull loads and preserve ventilation. The integrated ACC construction avoids a chain of separate modules and patch leads.

40GB-C10-QSFP is the longest of 2 verified length options in this family. Compared with 40GB-AC07-QSFP at 7m (23ft), it provides 3m of additional reach for a longer vertical drop, a wider rack or an adjacent-cabinet route. Confirm that the complete path requires this length, because unused slack still needs supported, bend-safe storage.

The HT cable carries the compatibility configuration associated with 40GB-C10-QSFP, while its mechanical assembly remains the fixed 10m (33ft) version described here. Incoming inspection, connector examination and a live link test are completed before packing. Customers with unusually old or new Extreme Networks software can request a pre-order check.

Quote HT part number 40GB-C10-QSFP with the required quantity. The 10m (33ft) length is fixed for this part number; if a different length is needed, select its corresponding page and OEM reference from the length list above. Standard HT labels and project-specific packaging are available.

HT inspects and tests every completed cable before it enters finished stock. Protective caps or covers are fitted where applicable, followed by anti-static or tray packaging and an outer carton. Custom labels can cross-reference the customer part number, 40GB-C10-QSFP and the 10m (33ft) length for easier inventory control.

Stock items are generally dispatched within one to three working days after order confirmation. DHL, UPS, FedEx, TNT and EMS are available for international delivery; larger consolidated orders can move by air or sea freight. Customer courier accounts and nominated forwarders are accepted.