Dell Networking 462-3635 Compatible 40G QSFP+ Passive Copper Cable, 0.5m (2ft)

The HT-manufactured 462-3635 compatible cable provides 40G connectivity for Dell Networking equipment. This 0.5m (2ft) version is a factory-terminated passive copper link without separate optical modules or patch cords, with an exact part number and length that can be matched directly to the equipment requirement.

OEM Part Number: 462-3635HT Part Number: 462-3635

Product Highlights

• Compatible alternative to Dell Networking 462-3635
• 40G connectivity at 40Gbps
• Interface configuration: QSFP+ to QSFP+
• Fixed length and part number: 0.5m (2ft), 462-3635
• Conductor specification: 30AWG
• Minimum bend radius: 35mm

This assembly uses 30AWG conductors, PVC (OFNR) jacket, minimum bend radius 35mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The 0.5m (2ft) length is suited to closely aligned ports where excessive slack would obstruct airflow or complicate dressing. Measure the actual port-to-port path before choosing 462-3635; even a short assembly must retain the specified bend radius and should never be pulled tight behind the equipment.

462-3635 is the shortest of 7 verified length options in this family. It is the preferred choice when the port positions are close and cable slack must be kept to a minimum. The next option is 331-8158 at 1m (3ft), adding 0.5m for a less direct routing path; selecting it unnecessarily would leave more cable to dress.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include SFF-8436, QSFP+ MSA and IEEE 802.3ba. Confirm that the host firmware and port configuration support the same operating mode.

A passive DAC has no separate optical conversion stage. Its low-power, low-latency operation is useful for short equipment links, but the assembly must remain within the length and signaling mode accepted by both hosts.

The HT cable carries the compatibility configuration associated with 462-3635, while its mechanical assembly remains the fixed 0.5m (2ft) version described here. Incoming inspection, connector examination and a live link test are completed before packing. Customers with unusually old or new Dell Networking software can request a pre-order check.

When ordering, specify 462-3635, cable length 0.5m (2ft) and the host platform. This allows our team to verify both the physical assembly and the compatibility requirement before production. Neutral labeling and customer packing lists can be arranged for volume orders.

HT inspects and tests every completed cable before it enters finished stock. Protective caps or covers are fitted where applicable, followed by anti-static or tray packaging and an outer carton. Custom labels can cross-reference the customer part number, 462-3635 and the 0.5m (2ft) length for easier inventory control.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.