Dell ACC-Q56DD-400G Compatible 400G QSFP-DD 8 x 50G PAM4 Active Copper Twinax Cable

Built for hosts that recognize ACC-Q56DD-400G, this HT-manufactured QSFP-DD ACC assembly delivers 400G direct-attach connectivity. It combines the connector ends and cable into one tested assembly, with 5m (16ft) covered by this series page.

Series Part Number: ACC-Q56DD-400GHT Part Number: ACC-Q56DD-400G

Product Highlights

• HT-manufactured compatible alternative for Dell ACC-Q56DD-400G
• 400G aggregate connectivity at 425Gbps
• Interface configuration: QSFP-DD
• Active Twinax / Copper
• Length configurations covered: 0.5m (2ft), 1m (3ft), 1.5m (5ft), 2m (7ft), 2.5m (8ft), 3m (10ft), 3m (10ft) and 5m (16ft)
• Conductor specification: 28AWG
• Power consumption: 2.5W Per End
• Operating temperature: 0 to 70°C (32 to 158°F)

• DAC-Q56DD-400G-0.5M
• DAC-Q56DD-400G-1M
• DAC-Q56DD-400G-1.5M
• DAC-Q56DD-400G-2M
• DAC-Q56DD-400G-2.5M
• ACC-Q56DD-400G-3M
• DAC-Q56DD-400G-3M
• ACC-Q56DD-400G-5M

ACC assemblies use active copper signal conditioning to extend practical copper-link reach while retaining a direct-attach installation. They suit high-density switch and accelerator connections where the host supports the stated active-cable type and power requirement.

The QSFP-DD interface and 400G data rate must match the equipment at both ends. For breakout versions, confirm the lane mapping and the speed of every downstream port; matching connector shapes alone does not establish interoperability.

The assembly is configured for equipment that recognizes the ACC-Q56DD-400G series. Before shipment, we check connector identification, link establishment and electrical link stability, signal integrity and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the switch, server or accelerator model and software release for a pre-order compatibility review.

When ordering, specify ACC-Q56DD-400G, the host platform and one of the covered configurations: 5m (16ft). If your purchase documentation uses any of the listed OEM part numbers, include that identifier as well so our team can verify the intended version before production.

Every ACC assembly undergoes continuity and link testing, compatibility verification and a visual inspection of both connector ends. Cables are coiled without exceeding their minimum bend radius, fitted with connector protection and packed in anti-static bags or protective trays before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.