Arista Networks AOC-S-S-25G-7M Compatible 25G SFP28 Active Optical Cable, 7m (23ft)

With a fixed 7m (23ft) cable and SFP28 to SFP28, the AOC-S-S-25G-7M compatible assembly simplifies 25G deployment. It is manufactured and tested by HT for Arista Networks equipment.

OEM Part Number: AOC-S-S-25G-7MHT Part Number: AOC-S-S-25G-7M

Product Highlights

• Compatible alternative to Arista Networks AOC-S-S-25G-7M
• 25G connectivity at 25Gbps
• Interface configuration: SFP28 to SFP28
• Fixed length and part number: 7m (23ft), AOC-S-S-25G-7M
• Minimum bend radius: 30mm

This assembly uses OFNP jacket, minimum bend radius 30mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The extended 7m (23ft) reach supports connections across adjacent racks or between separated equipment rows. Secure the cable along its route, protect both ends from pull loads and preserve ventilation. The integrated AOC construction avoids a chain of separate modules and patch leads.

AOC-S-S-25G-7M occupies the middle of this family between AOC-S-S-25G-5M at 5m (16ft) and AOC-S-S-25G-10M at 10m (33ft). It adds 2m over the shorter option for extra routing clearance, while the next longer version adds another 3m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

The optical engines and fiber are permanently integrated into this AOC. There are no detachable optical modules to clean or exchange. Handle the complete assembly by its connector housings and cable, and keep both ends matched to the same interface specification.

The HT cable carries the compatibility configuration associated with AOC-S-S-25G-7M, while its mechanical assembly remains the fixed 7m (23ft) version described here. Incoming inspection, connector examination and a live link test are completed before packing. Customers with unusually old or new Arista Networks software can request a pre-order check.

When ordering, specify AOC-S-S-25G-7M, cable length 7m (23ft) and the host platform. This allows our team to verify both the physical assembly and the compatibility requirement before production. Neutral labeling and customer packing lists can be arranged for volume orders.

HT inspects and tests every completed cable before it enters finished stock. Protective caps or covers are fitted where applicable, followed by anti-static or tray packaging and an outer carton. Custom labels can cross-reference the customer part number, AOC-S-S-25G-7M and the 7m (23ft) length for easier inventory control.

Lead time for ordinary configurations is normally one to three working days, while production quantities are confirmed with the order. We can arrange express courier or economy freight according to destination and carton volume, or hand the shipment to your appointed logistics provider.