Customized Duplex Fiber Patch Cable, LC/SC/FC/ST/LSH/MU/MTRJ, OS2

For procurement and engineering teams, the specification provides a practical basis for checking compatibility before production is requested. This custom-built fiber patch cable is built to the precise setup the project specifies: connector styles, polish, fiber mode, jacket and length are all specified at order time and the terminated assembly is factory terminated and optically tested before dispatch.

Product Highlights

• Precision Zirconia Ferrule Connectors Ensure Low Loss
• Duplex Zipcord Construction Reduces Risk of Damage from Crimping
• Available in LC, SC, FC, ST, LSH, MU, and MTRJ Connectors
• Available in G.657.A1 and G.657.A2 Fiber Grades
• Available in 1.2mm, 1.6mm, 1.8mm, 2.0mm, and 3.0mm Cable Diameters

The custom-built program covers the combinations that stock lists cannot: mixed connector families, non-standard jackets, unusual lengths, identification and packing to the project specification. The terminated assembly is terminated and tested exactly like a stock product, with the setup confirmed before factory assembly.

The OS2 interface on this jumper follows the polish discipline of the network it serves. Because mixing polishes on a mated pair destroys the return loss and can damage the ferrules, the patch side must be aligned with this adapter panel side exactly. When the documentation is unclear, the boot color and the optical interface housing tell the truth: green for APC, blue or beige for UPC.

Patch fields are rarely kind to fiber. Patch cords path through tight managers, sharp tray corners and crowded vertical channels. The bend-insensitive glass in the product assembly tolerates a 10mm fiber bend radius, and therefore a hurried routing decision during a night servicing window does not by itself turn into a measurable penalty on the connection.

Catalogue lengths cover the common patching routes: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), with custom-built length offered beyond the list. Specifying the measured path length keeps the slack out of the manager and the strain off the optical interfaces.

Every manufactured assembly is terminated with precision zirconia ferrule connectors and optically tested before packing: insertion loss and return loss are verified on every cable, and end-face geometry is inspected for consistent physical contact. The installed cable ships with dust caps on the two connectors and the test result offered on specify.

Refer to this setup by connector pair, fiber mode and length when specifying a quotation. For configurations outside the listed options, mixed connector families, jackets, identification or project packing, send the specification with the request and the factory will make certain of the build before factory assembly. A clear port or maintenance schedule helps us confirm the correct factory-built configuration before supply.