Customized Grade B Simplex Fiber Patch Cable, LC/SC/FC/MU, OS2

For site work, correct product selection should be followed by careful transport, connector inspection and retention of the fiber records. This customized fiber patch cable is built to the precise setup the project specifies: connector styles, polish, fiber mode, jacket and length are all specified at order time and the supplied assembly is factory terminated and optically tested before dispatch.

Product Highlights

• G.657.A1 Bend Insensitive Fiber with 10mm Min. Bend Radius
• Precision Zirconia Ferrule Connectors Ensure Low Loss
• Available in LC, SC, FC, and MU Grade B Connectors with 0.12dB Typ. IL
• Available in Riser (OFNR), LSZH, and Plenum (OFNP) Cable Jackets
• Available in 0.9mm, 2.0mm, and 3.0mm Cable Diameters

The customized program covers the combinations that stock lists cannot: mixed connector families, non-standard jackets, unusual lengths, labeling and packaging to the project specification. The supplied assembly is terminated and tested exactly like a stock product, with the setup confirmed before fabrication.

The OS2 interface on this jumper follows the polish discipline of the network it serves. Because mixing polishes on a mated pair destroys the return loss and can damage the ferrules, the patch side should be matched to the rack-mounted panel side exactly. When the documentation is unclear, the boot color and the connector being used housing tell the truth: green for APC, blue or beige for UPC.

Patch fields are rarely kind to fiber. Patch cords path through tight managers, sharp tray corners and crowded vertical channels. The bend-insensitive glass in this optical assembly tolerates a 10mm fiber bend radius; thus, a hurried routing decision during a night servicing window does not automatically turn into a measurable penalty on the connection.

Standard offerings cover the common patching routes: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 30m (98ft), with customized length supplied beyond the list. Specifying the measured path length keeps the slack out of the manager and the strain off the installed connectors.

Every supplied assembly is terminated with precision zirconia ferrule connectors and optically tested before packing: insertion loss and return loss are verified on each cable, and end-face geometry is inspected for consistent physical contact. The supplied cable ships with dust caps on both connectors and the test result supplied on order.

Refer to this setup by connector pair, fiber mode and length when purchasing a quotation. For configurations outside the listed options, mixed connector families, jackets, labeling or project packaging, send the specification with the request and the factory will ensure the build before fabrication. The order details should include any site identification needed by the installation team.