Customized MPO-16 Harness, 16F, OS2

This MPO Female/Male with Offset Key harness fans one multi-fiber connector out to duplex LC legs, replacing a cassette and patch cords with a single factory tested assembly. OS2 9/125µm fiber, 16 Fibers (Base-16), Plenum (OFNP)/LSZH jacket.

Available lengths are 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.

Product Highlights

• MPO Female/Male with Offset Key to LC/SC/FC/ST, 16 Fibers (Base-16)
• OS2 9/125µm, G.657.A1
• Straight Through/Crossover polarity
• Plenum (OFNP)/LSZH
• Minimum bend radius 10mm
• Stock lengths from 1m (3ft) to 30m (98ft), custom lengths on request

Install this harness between an MPO trunk or panel and LC based transceivers. The 16-fiber interface matches 400G SR8 optics, where all 16 fibers carry active transmit and receive lanes. The labeled duplex legs make it easy to land each pair on the correct port.

The harness replaces a cassette with a direct optical path from the MPO connector to each LC pair. This removes two mated connections from the channel, improving both loss budget and reliability. Custom leg lengths and labels are available on request.

To order, quote 16FMPOXXSMF together with the length and quantity you need. Private labeling, custom packaging and project specific documentation are all handled in-house.

As a factory we can modify almost every detail of this product: length, jacket material and color, polarity, gender, breakout geometry, labeling and packaging. Non-standard variants are routine work for us, not a special project.

We do not ship untested product. Each unit is measured on calibrated equipment for optical performance and visually inspected for end face quality before packing. Batch traceability is maintained so any field issue can be tracked back to production.

Every cable is protected with dust caps and individual packaging before being boxed for shipment. Batch test reports and your own part number labels can be included in each bag.