Customized MTP-24 Trunk Cable, 24-144F, OS2

Pre-terminated MTP® Elite Female/Male backbone trunk with 24-144 Fibers (Base-24) on OS2 9/125µm fiber. Instead of splicing dozens of connectors on site, your installers pull one cable, mount the panels and plug in.

Available lengths are 2m (7ft), 3m (10ft), 5m (16ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). We can also produce any intermediate or longer length to order, with your choice of labeling and packaging.

Product Highlights

• MTP® Elite Female/Male to MTP® Elite Female/Male, 24-144 Fibers (Base-24)
• OS2 9/125µm, G.657.A1
• Insertion loss ≤0.35dB, return loss ≥60dB
• Type A/Type B/Type C polarity
• Plenum (OFNP)/LSZH
• Minimum bend radius 10mm
• Stock lengths from 2m (7ft) to 30m (98ft), custom lengths on request

This trunk is designed for permanent backbone positions: between patch panels, from the core to aggregation rows, or between buildings on a campus. A 24-fiber MPO interface is the standard for 100GBASE-SR10 CFP, CFP2 and CPAK modules, and is equally at home in structured trunking between panels. Every breakout leg is numbered, which simplifies documentation and troubleshooting.

The trunk uses a double jacket design: a rugged outer sheath protects the whole bundle, while each breakout leg keeps its own jacket and numbering. Base-8 and Base-12 constructions are available depending on the fiber count. Polarity follows the Type shown in the table, and pulling eyes or mesh grips can be fitted for installation.

To order, quote XXMTPSMF together with the length and quantity you need. Private labeling, custom packaging and project specific documentation are all handled in-house.

Our engineering team handles custom MPO/MTP assemblies daily. If the standard configuration does not match your link design, send us the requirement and we will build exactly what your network needs at factory-direct cost.

Products are packed in anti-static or PE bags with connector dust caps fitted, then boxed in sturdy export cartons. Custom labels, barcodes and carton markings are available on request.

Our test routine covers insertion loss, return loss and ferrule end face inspection on every assembly. Because testing is done in-house, custom variants receive exactly the same verification as standard models.