Fortinet FN-CABLE-SFP56-DAC-L1 Compatible 50G SFP56 Passive Copper Twinax Cable, 1m (3ft)

With a fixed 1m (3ft) cable and SFP56 to SFP56, the FN-CABLE-SFP56-DAC-L1 compatible assembly simplifies 50G deployment. It is manufactured and tested by HT for Fortinet equipment.

OEM Part Number: FN-CABLE-SFP56-DAC-L1HT Part Number: FN-CABLE-SFP56-DAC-L1

Product Highlights

• Compatible alternative to Fortinet FN-CABLE-SFP56-DAC-L1
• 50G connectivity at 50Gbps
• Interface configuration: SFP56 to SFP56
• Fixed length and part number: 1m (3ft), FN-CABLE-SFP56-DAC-L1
• Cable construction: Passive Twinax
• Conductor specification: 30AWG
• Maximum power consumption: ＜0.1W

The rated power consumption is ＜0.1W. Include this load in the host-port power and thermal budget, especially in densely populated switches. Maintain front-panel clearance and do not bundle the cable so tightly that it obstructs airflow around the connectors.

At 1m (3ft), FN-CABLE-SFP56-DAC-L1 is a practical choice for direct connections within one rack. Route the cable along the intended management path rather than pulling it diagonally across adjacent connectors, and leave enough clearance for insertion, removal and front-panel airflow.

This assembly uses 30AWG conductors, PVC jacket. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The intended application is 50G Ethernet.

A passive DAC has no separate optical conversion stage. Its low-power, low-latency operation is useful for short equipment links, but the assembly must remain within the length and signaling mode accepted by both hosts.

Our compatibility setup for Fortinet FN-CABLE-SFP56-DAC-L1 is checked together with the physical 1m (3ft) assembly. Factory verification covers connector condition, host identification, error-free link establishment and electrical continuity, link stability and diagnostic readouts. Providing the exact host model and firmware release helps us identify platform-specific requirements before production.

Use part number FN-CABLE-SFP56-DAC-L1 for the 1m (3ft) assembly. For mixed-length projects, list each required part number and quantity separately so that every cable can be tested and packed according to its intended installation.

Every FN-CABLE-SFP56-DAC-L1 compatible assembly undergoes link testing, compatibility verification and visual inspection. The 1m (3ft) cable is coiled without exceeding its minimum bend radius, fitted with connector protection and packed in an anti-static bag or protective tray before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.