Juniper Networks JNP-40G-AOC-7M Compatible 40G QSFP+ Active Optical Cable, 7m (23ft)

This 7m (23ft) AOC cable is built for Juniper Networks equipment requiring the JNP-40G-AOC-7M interface. The 40Gbps link uses QSFP+ to QSFP+ and is supplied as one complete tested assembly.

OEM Part Number: JNP-40G-AOC-7MHT Part Number: JNP-40G-AOC-7M

Product Highlights

• Compatible alternative to Juniper Networks JNP-40G-AOC-7M
• 40G connectivity at 40Gbps
• Interface configuration: QSFP+ to QSFP+
• Fixed length and part number: 7m (23ft), JNP-40G-AOC-7M
• Minimum bend radius: 30mm

Juniper platform documentation distinguishes straight QSFP28 DAC or AOC connections from DACBO and AOCBO breakout operation. On channelized systems, the host port must be configured for the required breakout mode. Match this HT compatible cable to the exact Juniper part number and the intended platform configuration.

The extended 7m (23ft) reach supports connections across adjacent racks or between separated equipment rows. Secure the cable along its route, protect both ends from pull loads and preserve ventilation. The integrated AOC construction avoids a chain of separate modules and patch leads.

JNP-40G-AOC-7M occupies the middle of this family between JNP-40G-AOC-5M at 5m (16ft) and JNP-40G-AOC-10M at 10m (33ft). It adds 2m over the shorter option for extra routing clearance, while the next longer version adds another 3m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

This assembly uses OFNP jacket, minimum bend radius 30mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include 10G/40Gigabit Ethernet or Fibre Channel. Confirm that the host firmware and port configuration support the same operating mode.

The optical engines and fiber are permanently integrated into this AOC. There are no detachable optical modules to clean or exchange. Handle the complete assembly by its connector housings and cable, and keep both ends matched to the same interface specification.

Compatibility is more than matching the QSFP+ to QSFP+ shape. This assembly is prepared for hosts expecting JNP-40G-AOC-7M and is checked for identification, stable link behavior and optical link operation, receive activity and diagnostic readouts. We recommend confirming the equipment model and software release for critical deployments or mixed-vendor installations.

This product is ordered as JNP-40G-AOC-7M in 7m (23ft). Include the equipment model and software release if you would like a pre-order compatibility review. Other lengths use different part numbers and should not be substituted into the same order line.

HT inspects and tests every completed cable before it enters finished stock. Protective caps or covers are fitted where applicable, followed by anti-static or tray packaging and an outer carton. Custom labels can cross-reference the customer part number, JNP-40G-AOC-7M and the 7m (23ft) length for easier inventory control.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.