LC UPC to LC UPC Duplex OM4, 1.6mm, ofnp Fiber Patch Cable

Engineering teams can use the documented values below to compare the product with the intended channel and as-built requirements. This OM4 fiber patch cable carries a LC UPC interface on one end and a LC UPC interface on the other, factory terminated on OM4 glass and optically tested as a full item. The duplex zipcord design keeps the transmit and receive strands paired in one item for fast, error-free patching.

Product Highlights

• Bend Insensitive Fiber with 7.5mm Min. Bend Radius
• Precision Zirconia Ferrule Connectors Ensure Low Loss
• Thinner Cable Diameter Facilitates Airflow and Improves Flexibility for Density Cabling
• Flame-Retardant Plenum (OFNP) for Light to Medium Duty Indoor Applications
• Color-Coded Cable Jacket for Easy Identification

A duplex jumper is two fibers with a defined A-to-B crossover. Getting polarity right at the cord level keeps the optical path consistent end to end, which is why these assemblies are built and tested as a pair rather than as two standalone strands.

This OM4 item serves the short-reach fabric of the data center: 10G and 25G server uplinks, 40G and 100G SR4 spine links and the inter-row runs between them. On OM4 glass, 10G Ethernet holds to 400 meters and 100G SR4 to 100 meters, which covers the overwhelming majority of in-hall routes with margin to spare.

Regular length versions cover the common patching routes: 2m (7ft), 3m (10ft), 5m (16ft), with made-to-order length offered beyond the list. Specifying the measured channel length keeps the slack out of the manager and the strain off the connection interfaces.

Each optical assembly is terminated with precision zirconia ferrule connectors and optically tested before packing: insertion loss and return loss are verified on every cable, and end-face geometry is inspected for consistent physical contact. The relevant cable ships with dust caps on the two connectors and the test result offered on specify.

Refer to this design by connector pair, fiber mode and length when requisitioning a quotation. For configurations outside the listed options, mixed connector families, jackets, identification or project packing, send the requirement with the enquiry and the factory will cross-check the build before production is released. Project orders can include documentation and labeling requirements alongside the technical configuration.