NVIDIA/Mellanox MC220731V-100 Compatible 56G QSFP+ InfiniBand FDR Active Optical Cable, 100m (328ft)

The MC220731V-100 cable offers a direct QSFP+ to QSFP+ connection at 56Gbps. Its 100m (328ft) length and AOC construction are intended for NVIDIA/Mellanox equipment, with no separate transceiver-and-patch-cord assembly required.

OEM Part Number: MC220731V-100HT Part Number: MC220731V-100

Product Highlights

• Compatible alternative to NVIDIA/Mellanox MC220731V-100
• High-Speed connectivity at 56Gbps
• Interface configuration: QSFP+ to QSFP+
• Fixed length and part number: 100m (328ft), MC220731V-100
• Minimum bend radius: 7.5mm

The listed modulation format is 4x10.3125Gbps NRZ. Both host interfaces must be configured for the same aggregate rate and lane arrangement. A connector that fits mechanically does not by itself guarantee that the remote port supports this encoding or breakout mode.

The optical engines and fiber are permanently integrated into this AOC. There are no detachable optical modules to clean or exchange. Handle the complete assembly by its connector housings and cable, and keep both ends matched to the same interface specification.

The extended 100m (328ft) reach supports connections across adjacent racks or between separated equipment rows. Secure the cable along its route, protect both ends from pull loads and preserve ventilation. The integrated AOC construction avoids a chain of separate modules and patch leads.

This assembly uses OFNP jacket, minimum bend radius 7.5mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include SFF-8436, QSFP+ MSA, 56G InfiniBand FDR. Confirm that the host firmware and port configuration support the same operating mode.

Our compatibility setup for NVIDIA/Mellanox MC220731V-100 is checked together with the physical 100m (328ft) assembly. Factory verification covers connector condition, host identification, error-free link establishment and optical link operation, receive activity and diagnostic readouts. Providing the exact host model and firmware release helps us identify platform-specific requirements before production.

This product is ordered as MC220731V-100 in 100m (328ft). Include the equipment model and software release if you would like a pre-order compatibility review. Other lengths use different part numbers and should not be substituted into the same order line.

Every MC220731V-100 compatible assembly undergoes link testing, compatibility verification and visual inspection. The 100m (328ft) cable is coiled without exceeding its minimum bend radius, fitted with connector protection and packed in an anti-static bag or protective tray before cartoning. Project labels and packing lists are available for volume orders.

Stock items are generally dispatched within one to three working days after order confirmation. DHL, UPS, FedEx, TNT and EMS are available for international delivery; larger consolidated orders can move by air or sea freight. Customer courier accounts and nominated forwarders are accepted.