H3C OSFP-800G-2OFLAC Compatible 800G OSFP 8 x 100G PAM4 IHS/Finned Top to 2 x 400G OSFP 4 x 100G PAM4 RHS/Flat Top Active Copper Breakout Cable

This H3C OSFP-800G-2OFLAC compatible ACC cable provides 800G connectivity through a 800G OSFP (IHS/Finned Top) to 2x 400G OSFP (RHS/Flat Top) interface. It is an active copper connection with signal conditioning for the stated high-speed interface. The series configurations covered on this page are 1m (3ft).

Series Part Number: OSFP-800G-2OFLACHT Part Number: OSFP-800G-2OFLAC

Product Highlights

• HT-manufactured compatible alternative for H3C OSFP-800G-2OFLAC
• 800G aggregate connectivity at 800Gbps
• Interface configuration: 800G OSFP (IHS/Finned Top) to 2x 400G OSFP (RHS/Flat Top)
• Active Breakout DAC (ACC) / Copper
• Length configurations covered: 1m (3ft)
• Conductor specification: 30AWG
• Power consumption: 1.5W (800G End)/0.6W (400G Per End)
• Operating temperature: 0 to 70°C (32 to 158°F)

This series page covers the following verified source length configurations: 1m (3ft). Each documented length-specific OEM reference is treated as its own product configuration; follow the corresponding product link where available. Select the required length when requesting a quotation; custom project lengths are available for discussion.

• OSFP-800G-2OFLAC01

ACC assemblies use active copper signal conditioning to extend practical copper-link reach while retaining a direct-attach installation. They suit high-density switch and accelerator connections where the host supports the stated active-cable type and power requirement.

The 800G OSFP (IHS/Finned Top) to 2x 400G OSFP (RHS/Flat Top) interface and 800G data rate must match the equipment at both ends. The source application is listed as 800G/400G Ethernet. For breakout versions, confirm the lane mapping and the speed of every downstream port; matching connector shapes alone does not establish interoperability.

The assembly is configured for equipment that recognizes the OSFP-800G-2OFLAC series. Before shipment, we check connector identification, link establishment and electrical link stability, signal integrity and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the switch, server or accelerator model and software release for a pre-order compatibility review.

This series is ordered by the base HT part number OSFP-800G-2OFLAC plus length and compatibility requirement. Available source configurations documented on this page are 1m (3ft); other project lengths can be discussed with the factory, and each length-specific OEM reference is reviewed under its own product configuration.

Every ACC assembly undergoes continuity and link testing, compatibility verification and a visual inspection of both connector ends. Cables are coiled without exceeding their minimum bend radius, fitted with connector protection and packed in anti-static bags or protective trays before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.