800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Active Copper Breakout DAC Cable

The 800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Active Copper Breakout DAC Cable provides an 800Gbps copper connection between 800G OSFP (IHS/Finned Top) to 2x 400G OSFP (RHS/Flat Top) ports with a cable length of 1~5m (3ft-16ft). Active electronics inside the connectors extend the usable reach compared with passive copper while keeping power draw low. Direct attach copper keeps both latency and power consumption to a minimum, which makes it the economical choice for 800G Ethernet data center and cloud network environments.

Product Highlights

• 800G OSFP (IHS/Finned Top) to 2x 400G OSFP (RHS/Flat Top)
• Data rate: 800Gbps
• Cable type: Active Breakout DAC (ACC)
• Length: 1~5m (3ft-16ft)
• Operating temperature: 0 to 70°C (32 to 158°F)

The 800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Active Copper Breakout DAC Cable connects 800G OSFP (IHS/Finned Top) to 2x 400G OSFP (RHS/Flat Top) ports at 800Gbps in 800G Ethernet data center and cloud network environments. This unit is supplied at 1~5m (3ft-16ft). One port becomes 2x 400G OSFP (RHS/Flat Top), a common pattern for connecting newer aggregation ports to an installed base of lower speed equipment. If your project needs a specific vendor coding or custom label, our production line handles it as a routine step before packing. The link runs 8x 100G-PAM4 to Dual 4x 100G-PMA4 modulation, which keeps it aligned with current 800G switch silicon.

Compliance: OSFP MSA, CMIS 5.0, IEEE 802.3 ck. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.

This model is supplied at 1~5m (3ft-16ft) under part number OSFP-800G-2OFLACxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 26~30AWG.

Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.

Standard products are held in stock and usually ship within one to three working days. We dispatch worldwide by DHL, UPS, FedEx, TNT or EMS, and for bulk orders we arrange air or sea freight. Shipments can also be sent collect on your own courier account or delivered to your freight forwarder.

Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.

Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.