800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Active Electrical Copper Breakout AEC

The 800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Active Electrical Copper Breakout AEC provides an 800Gbps copper connection between OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top) ports with a cable length of 1~5m (3~16ft). Active electronics inside the connectors extend the usable reach compared with passive copper while keeping power draw low. Direct attach copper keeps both latency and power consumption to a minimum, which makes it the economical choice for 800G Ethernet data center and cloud network environments.

Product Highlights

• OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top)
• Data rate: 800Gbps
• Cable type: Active Breakout DAC (AEC)
• Length: 1~5m (3~16ft)
• Operating temperature: 0 to 70°C (32 to 158°F)

The 800G OSFP IHS/Finned Top to 2 x 400G OSFP RHS/Flat Top Active Electrical Copper Breakout AEC connects OSFP (IHS/Finned Top) to 2x OSFP (RHS/Flat Top) ports at 800Gbps in 800G Ethernet data center and cloud network environments. This unit is supplied at 1~5m (3~16ft). One port becomes 2x OSFP (RHS/Flat Top), a common pattern for connecting newer aggregation ports to an installed base of lower speed equipment. Our factory programs the compatibility coding for your switch brand before shipment and verifies each unit on real host equipment. The link runs 8x100G-PAM4 to Dual 4x100G-PAM4 modulation, which keeps it aligned with current 800G switch silicon.

Compliance: OSFP MSA Rev5.1, IEEE 802.3ck, CMIS 5.0. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.

This model is supplied at 1~5m (3~16ft) under part number OSFP-800G-2OFLAExxx. Other lengths of the same assembly can be produced on request. Wire gauge: 28~32AWG.

Production samples and every outgoing batch pass through bit-error-rate measurement, temperature verification and plug-in compatibility checks on mainstream switches and routers. Because we are the manufacturer, any issue found in testing is fed back to the production line immediately instead of being passed on to customers.

Products are first packed into blister trays or self-sealed bags and then into cartons. Standard labels and marks are applied by default, and customized packing and labeling are available on request.

Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.

Our warehouse keeps fast-moving transceivers and cables ready for same-week dispatch. Courier, air freight and sea freight options are all available depending on your budget and schedule, and we consolidate multiple items into one shipment whenever it saves you cost.