NVIDIA/Mellanox OSFP-800G-2QAE Compatible 800G Twin-port OSFP 8 x 100G PAM4 IHS/Finned Top to 2 x 400G QSFP112 4 x 100G PAM4 InfiniBand NDR Active Electrical Breakout Cable

This NVIDIA/Mellanox OSFP-800G-2QAE compatible AEC cable provides 800G connectivity through a OSFP (IHS/Finned Top) to 2x QSFP112 interface. It is an active electrical connection designed to maintain signal integrity at the stated data rate. The series configurations covered on this page are 1m (3ft).

Series Part Number: OSFP-800G-2QAEHT Part Number: OSFP-800G-2QAE

Product Highlights

• HT-manufactured compatible alternative for NVIDIA/Mellanox OSFP-800G-2QAE
• 800G aggregate connectivity at 850Gbps (8x 106.25Gbps)
• Interface configuration: OSFP (IHS/Finned Top) to 2x QSFP112
• Active Breakout DAC (AEC) / Copper
• Length configurations covered: 1m (3ft)
• Conductor specification: 32AWG
• Power consumption: 12W @800G, 7.5W @400G
• Operating temperature: 0 to 70°C (32 to 158°F)

This series page covers the following verified source length configurations: 1m (3ft). Each documented length-specific OEM reference is treated as its own product configuration; follow the corresponding product link where available. Select the required length when requesting a quotation; custom project lengths are available for discussion.

• OSFP-800G-2QAE01

AEC assemblies are intended for high-speed electrical links that require active signal recovery or retiming. Confirm host support, per-end power consumption and airflow, and keep both ends on the interface and breakout configuration stated in the specifications.

The OSFP (IHS/Finned Top) to 2x QSFP112 interface and 800G data rate must match the equipment at both ends. The source application is listed as 800G InfiniBand. For breakout versions, confirm the lane mapping and the speed of every downstream port; matching connector shapes alone does not establish interoperability.

The assembly is configured for equipment that recognizes the OSFP-800G-2QAE series. Before shipment, we check connector identification, link establishment and electrical link stability, signal integrity and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the switch, server or accelerator model and software release for a pre-order compatibility review.

Quote HT part number OSFP-800G-2QAE, the required length from 1m (3ft), and the OEM part number used by your equipment. The length-specific OEM identifiers above identify the exact product configurations so each reference can be reviewed and ordered separately.

Every AEC assembly undergoes continuity and link testing, compatibility verification and a visual inspection of both connector ends. Cables are coiled without exceeding their minimum bend radius, fitted with connector protection and packed in anti-static bags or protective trays before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.