800G OSFP IHS/Finned Top to 2 x 400G OSFP IHS/Finned Top Passive Copper Breakout DAC Cable

The 800G OSFP IHS/Finned Top to 2 x 400G OSFP IHS/Finned Top Passive Copper Breakout DAC Cable is a passive breakout dac direct attach copper cable with OSFP (IHS/Finned Top) to 4x OSFP (IHS/Finned Top), supporting 800Gbps links over a length of 0.5-2m (2ft-7ft). As a passive cable it draws essentially no power and adds no latency to the link. It is a cost effective, low latency interconnect for 800G Ethernet data center and cloud network environments, and complies with OSFP MSA, CMIS Rev4.0, IEEE 802.3ck.

Product Highlights

• OSFP (IHS/Finned Top) to 4x OSFP (IHS/Finned Top)
• Data rate: 800Gbps
• Cable type: Passive Breakout DAC
• Length: 0.5-2m (2ft-7ft)
• Operating temperature: 0 to 70°C (32 to 158°F)

Designed for 800G Ethernet data center and cloud network environments, the 800G OSFP IHS/Finned Top to 2 x 400G OSFP IHS/Finned Top Passive Copper Breakout DAC Cable carries 800Gbps between OSFP (IHS/Finned Top) to 4x OSFP (IHS/Finned Top) interfaces. This unit is supplied at 0.5-2m (2ft-7ft). The breakout design lets one high speed port feed 4x OSFP (IHS/Finned Top), which raises port utilization and simplifies cabling in dense rows. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request.

Standards compliance covers OSFP MSA, CMIS Rev4.0, IEEE 802.3ck. The unit works in any equipment with a standard OSFP (IHS/Finned Top) to 4x OSFP (IHS/Finned Top) interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.

This model is supplied at 0.5-2m (2ft-7ft) under part number OSFP-800G-4OPCxxx. Other lengths of the same assembly can be produced on request. Wire gauge: 28-30AWG. Volume pricing is available for project quantities.

We ship to customers around the world every week. Express couriers handle most orders door to door in a few days; larger consignments go by air or sea to keep freight costs down. Tracking information is provided for every shipment, and we are flexible on shipping accounts and forwarders.

We do not ship untested stock. Each transceiver and cable is powered up in our test racks, checked for link stability, transmit power, receiver sensitivity and diagnostic readouts, and only then packed for delivery. This factory-level testing is one reason network integrators keep reordering from us year after year.

Products are first packed into blister trays or self-sealed bags and then into cartons. Standard labels and marks are applied by default, and customized packing and labeling are available on request.

Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.