Juniper Networks OSFP-800G-AOC Compatible 800G OSFP 8 x 100G PAM4 IHS/Finned Top Active Optical Cable

The OSFP-800G-AOC compatible cable series is intended for Juniper Networks equipment requiring a 800G AOC connection. Its OSFP (IHS/Finned Top) to OSFP (IHS/Finned Top) configuration supports an active optical connection with permanently attached ends and fiber integrated into the assembly, while the verified source lengths listed below make length selection explicit.

Series Part Number: OSFP-800G-AOCHT Part Number: OSFP-800G-AOC

Product Highlights

• HT-manufactured compatible alternative for Juniper Networks OSFP-800G-AOC
• 800G aggregate connectivity at 800Gbps
• Interface configuration: OSFP (IHS/Finned Top) to OSFP (IHS/Finned Top)
• Active Optical Cable
• Length configurations covered: 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft), 30m (98ft) and 50m (164ft)
• Power consumption: 14W Per End
• Operating temperature: 0 to 70°C (32 to 158°F)

• OSFP-800G-AOC-1M
• OSFP-800G-AOC-3M
• OSFP-800G-AOC-5M
• OSFP-800G-AOC-7M
• OSFP-800G-AOC-10M
• OSFP-800G-AOC-15M
• OSFP-800G-AOC-20M
• OSFP-800G-AOC-25M
• OSFP-800G-AOC-30M
• OSFP-800G-AOC-50M

AOC assemblies integrate the optical engines and fiber into a single factory-terminated link. They are useful for longer or lighter high-speed connections than copper direct attach, with no fiber polarity or connector cleaning required between separate patch cords and modules.

The OSFP (IHS/Finned Top) to OSFP (IHS/Finned Top) interface and 800G data rate must match the equipment at both ends. For breakout versions, confirm the lane mapping and the speed of every downstream port; matching connector shapes alone does not establish interoperability.

The assembly is configured for equipment that recognizes the OSFP-800G-AOC series. Before shipment, we check connector identification, link establishment and optical link operation, receive activity and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the switch, server or accelerator model and software release for a pre-order compatibility review.

This series is ordered by the base HT part number OSFP-800G-AOC plus length and compatibility requirement. Available source configurations documented on this page are 1m (3ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft), 30m (98ft) and 50m (164ft); other lengths can be discussed with the factory with each length-specific OEM reference reviewed under its own product configuration.

Every AOC assembly undergoes continuity and link testing, compatibility verification and a visual inspection of both connector ends. Cables are coiled without exceeding their minimum bend radius, fitted with connector protection and packed in anti-static bags or protective trays before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.