Juniper Networks OSFP-800G-OFLPC Compatible 800G OSFP 8 x 100G PAM4 IHS/Finned Top to OSFP 8 x 100G PAM4 RHS/Flat Top Passive Copper Twinax Cable

Built for hosts that recognize OSFP-800G-OFLPC, this HT-manufactured OSFP (IHS/Finned Top) to OSFP (RHS/Flat Top) DAC assembly delivers 800G direct-attach connectivity. It combines the connector ends and cable into one tested assembly, with 0.5m (2ft) and 2m (7ft) covered by this series page.

Series Part Number: OSFP-800G-OFLPCHT Part Number: OSFP-800G-OFLPC

Product Highlights

• HT-manufactured compatible alternative for Juniper Networks OSFP-800G-OFLPC
• 800G aggregate connectivity at 800Gbps
• Interface configuration: OSFP (IHS/Finned Top) to OSFP (RHS/Flat Top)
• Passive DAC / Copper
• Length configurations covered: 0.5m (2ft) and 2m (7ft)
• Conductor specification: 30AWG
• Power consumption: 0.1W Per End
• Operating temperature: 0 to 70°C (32 to 158°F)

This series page covers the following verified source length configurations: 0.5m (2ft) and 2m (7ft). Each documented length-specific OEM reference is treated as its own product configuration; follow the corresponding product link where available. Select the required length when requesting a quotation; custom project lengths are available for discussion.

• OSFP-800G-OFLPC005

Passive DAC assemblies are normally used for short switch-to-switch, switch-to-server and rack-adjacent links. They draw very little power and avoid separate optical components, but the selected length must remain within the host and cable specification.

The OSFP (IHS/Finned Top) to OSFP (RHS/Flat Top) interface and 800G data rate must match the equipment at both ends. The source application is listed as 800G Ethernet. For breakout versions, confirm the lane mapping and the speed of every downstream port; matching connector shapes alone does not establish interoperability.

The assembly is configured for equipment that recognizes the OSFP-800G-OFLPC series. Before shipment, we check connector identification, link establishment and electrical link stability, signal integrity and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the switch, server or accelerator model and software release for a pre-order compatibility review.

Quote HT part number OSFP-800G-OFLPC, the required length from 0.5m (2ft) and 2m (7ft), and the OEM part number used by your equipment. The length-specific OEM identifiers above identify the exact product configurations so each reference can be reviewed and ordered separately.

Every DAC assembly undergoes continuity and link testing, compatibility verification and a visual inspection of both connector ends. Cables are coiled without exceeding their minimum bend radius, fitted with connector protection and packed in anti-static bags or protective trays before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.