1.6T OSFP224 ACxxx Active DAC Cable Flat Top

The 1.6T OSFP224 ACxxx Active DAC Cable Flat Top provides a 1600Gbps copper connection between OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top) ports with a cable length of Customized Length. Active electronics inside the connectors extend the usable reach compared with passive copper while keeping power draw low. Direct attach copper keeps both latency and power consumption to a minimum, which makes it the economical choice for 1.6T Ethernet data center and cloud network environments.

Product Highlights

• OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top)
• Data rate: 1600Gbps
• Cable type: Active DAC (ACC)
• Length: Customized Length
• Operating temperature: 0 to 70°C (32 to 158°F)

The 1.6T OSFP224 ACxxx Active DAC Cable Flat Top connects OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top) ports at 1600Gbps in 1.6T Ethernet data center and cloud network environments. This unit is supplied at Customized Length. It installs directly into standard ports with no separate transceivers or patch cords to manage at either end. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request. The link runs 8x 200G-PAM4 to 8x 200G-PAM4 modulation, which keeps it aligned with current 1.6T switch silicon.

This product is designed and tested to comply with OSFP Rev 5.2, CMIS 5.0, IEEE 802.3df and 802.3dj. It plugs into any standards-based OSFP (RHS/Flat Top) to OSFP (RHS/Flat Top) port, and compatibility coding for specific switch or router brands can be done in our factory before shipment.

This model is supplied at Customized Length under part number OSFPFL-1.6T-ACxxx. Other lengths of the same assembly can be produced on request.

Most orders travel by international express and arrive within days; palletized freight by air or sea is used for volume orders. If you prefer, we ship on your DHL, UPS or FedEx account, or deliver to your appointed agent in China for onward consolidation.

From incoming component inspection to final burn-in, quality is controlled at each step of production. Finished units are verified on real networking equipment in our compatibility lab, and test records are kept per batch so that any field question can be traced back quickly.

Transceivers and cables are individually protected against static and dust, then consolidated into sturdy cartons suitable for international courier shipment. For larger orders we shrink-wrap and strap cartons onto pallets. Tell us your warehouse or retail requirements and we will pack accordingly.

Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.