H3C OSFPFL-200G-QAO Compatible 200G OSFP 4 x 50G PAM4 RHS/Flat Top to 200G QSFP56 4 x 50G PAM4 Active Optical Cable

Built for hosts that recognize OSFPFL-200G-QAO, this HT-manufactured OSFP (RHS/Flat Top) to QSFP56 AOC assembly delivers 200G direct-attach connectivity. It combines the connector ends and cable into one tested assembly, with 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft) covered by this series page.

Series Part Number: OSFPFL-200G-QAOHT Part Number: OSFPFL-200G-QAO

Product Highlights

• HT-manufactured compatible alternative for H3C OSFPFL-200G-QAO
• 200G aggregate connectivity at 200Gbps
• Interface configuration: OSFP (RHS/Flat Top) to QSFP56
• AOC
• Length configurations covered: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft)
• Power consumption: 10W (OSFP-FL End)5.5W (QSFP56 End)
• Operating temperature: 0 to 70°C (32 to 158°F)

This series page covers the following verified source length configurations: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). Each documented length-specific OEM reference is treated as its own product configuration; follow the corresponding product link where available. Select the required length when requesting a quotation; custom project lengths are available for discussion.

• OSFPFL-200G-QAO01

AOC assemblies integrate the optical engines and fiber into a single factory-terminated link. They are useful for longer or lighter high-speed connections than copper direct attach, with no fiber polarity or connector cleaning required between separate patch cords and modules.

The OSFP (RHS/Flat Top) to QSFP56 interface and 200G data rate must match the equipment at both ends. For breakout versions, confirm the lane mapping and the speed of every downstream port; matching connector shapes alone does not establish interoperability.

The assembly is configured for equipment that recognizes the OSFPFL-200G-QAO series. Before shipment, we check connector identification, link establishment and optical link operation, receive activity and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the switch, server or accelerator model and software release for a pre-order compatibility review.

When ordering, specify OSFPFL-200G-QAO, the host platform and one of the covered configurations: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). If your purchase documentation uses any of the listed OEM part numbers, include that identifier as well so our team can verify the intended version before production.

Every AOC assembly undergoes continuity and link testing, compatibility verification and a visual inspection of both connector ends. Cables are coiled without exceeding their minimum bend radius, fitted with connector protection and packed in anti-static bags or protective trays before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.