800G QSFP-DD QDD AExxx AEC

For short reach 800Gbps links in 800G Ethernet data center and cloud network environments, the 800G QSFP-DD QDD AExxx AEC offers a factory terminated active dac (aec) assembly with QSFP-DD to QSFP-DD connectors and a length of 1~5m (3~16ft). Active electronics inside the connectors extend the usable reach compared with passive copper while keeping power draw low. The cable meets CMIS 5.0, IEEE 802.3ck, QSFP-DD MSA Rev6.3.

Product Highlights

• QSFP-DD to QSFP-DD
• Data rate: 800Gbps
• Cable type: Active DAC (AEC)
• Length: 1~5m (3~16ft)
• Operating temperature: 0 to 70°C (32 to 158°F)

Designed for 800G Ethernet data center and cloud network environments, the 800G QSFP-DD QDD AExxx AEC carries 800Gbps between QSFP-DD to QSFP-DD interfaces. This unit is supplied at 1~5m (3~16ft). The integrated construction removes separate optics from the link budget and reduces the number of failure points in the row. Custom labeling, packaging and compatibility coding for specific equipment vendors are available from our factory on request. The link runs 8x100G-PAM4 modulation, which keeps it aligned with current 800G switch silicon.

Compliance: CMIS 5.0, IEEE 802.3ck, QSFP-DD MSA Rev6.3. Every unit's EEPROM coding and link behavior are verified on real host equipment in our lab, so what arrives at your site is ready to use.

This model is supplied at 1~5m (3~16ft) under part number QDD-800G-AExxx. Other lengths of the same assembly can be produced on request. Wire gauge: 28~32AWG. Volume pricing is available for project quantities.

Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.

Most orders travel by international express and arrive within days; palletized freight by air or sea is used for volume orders. If you prefer, we ship on your DHL, UPS or FedEx account, or deliver to your appointed agent in China for onward consolidation.

Production samples and every outgoing batch pass through bit-error-rate measurement, temperature verification and plug-in compatibility checks on mainstream switches and routers. Because we are the manufacturer, any issue found in testing is fed back to the production line immediately instead of being passed on to customers.

Each unit is sealed in an anti-static bag, cushioned in a blister tray and boxed in an export-grade carton. Outer cartons carry handling marks and can be palletized for air or sea freight. If your project requires retail boxes, barcodes or your own brand on the label, we can arrange that as well.