Extreme Networks QSFP-100G-2QPC Compatible 100G QSFP28 4 x 25G NRZ to 2 x 50G QSFP28 2 x 25G NRZ Passive Copper Breakout Cable

Use this DAC cable where a 100G link is required between compatible QSFP28 to 2x SFP28 ports. This HT version corresponds to Extreme Networks QSFP-100G-2QPC and covers 0.5m (2ft) and 3m (10ft); electrical or optical construction follows the DAC specification rather than a detachable transceiver-and-patch-cord arrangement.

Series Part Number: QSFP-100G-2QPCHT Part Number: QSFP-100G-2QPC

Product Highlights

• HT-manufactured compatible alternative for Extreme Networks QSFP-100G-2QPC
• 100G aggregate connectivity at 100Gbps
• Interface configuration: QSFP28 to 2x SFP28
• Passive Breakout DAC / Copper
• Length configurations covered: 0.5m (2ft) and 3m (10ft)
• Conductor specification: 30AWG
• Power consumption: 0.5W
• Operating temperature: 0-70℃(32 to 158°F)

This series page covers the following verified source length configurations: 0.5m (2ft) and 3m (10ft). Each documented length-specific OEM reference is treated as its own product configuration; follow the corresponding product link where available. Select the required length when requesting a quotation; custom project lengths are available for discussion.

• QSFP-100G-2QPC005

Passive DAC assemblies are normally used for short switch-to-switch, switch-to-server and rack-adjacent links. They draw very little power and avoid separate optical components, but the selected length must remain within the host and cable specification.

The QSFP28 to 2x SFP28 interface and 100G data rate must match the equipment at both ends. The source application is listed as 100G/50G Ethernet, 128G Fibre Channel. For breakout versions, confirm the lane mapping and the speed of every downstream port; matching connector shapes alone does not establish interoperability.

The assembly is configured for equipment that recognizes the QSFP-100G-2QPC series. Before shipment, we check connector identification, link establishment and electrical link stability, signal integrity and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the switch, server or accelerator model and software release for a pre-order compatibility review.

This series is ordered by the base HT part number QSFP-100G-2QPC plus length and compatibility requirement. Available source configurations documented on this page are 0.5m (2ft) and 3m (10ft); other project lengths can be discussed with the factory, and each length-specific OEM reference is reviewed under its own product configuration.

Every DAC assembly undergoes continuity and link testing, compatibility verification and a visual inspection of both connector ends. Cables are coiled without exceeding their minimum bend radius, fitted with connector protection and packed in anti-static bags or protective trays before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.