Extreme Networks QSFP-100G-4SAC Compatible 100G QSFP28 4 x 25G NRZ to 4 x 25G SFP28 NRZ Active Copper Breakout Cable

Built for hosts that recognize QSFP-100G-4SAC, this HT-manufactured QSFP28 to 4x SFP28 ACC assembly delivers 100G direct-attach connectivity. It combines the connector ends and cable into one tested assembly, with 1m (3ft) and 3m (10ft) covered by this series page.

Series Part Number: QSFP-100G-4SACHT Part Number: QSFP-100G-4SAC

Product Highlights

• HT-manufactured compatible alternative for Extreme Networks QSFP-100G-4SAC
• 100G aggregate connectivity at 100Gbps
• Interface configuration: QSFP28 to 4x SFP28
• Active Breakout DAC / Copper
• Length configurations covered: 1m (3ft) and 3m (10ft)
• Conductor specification: 30AWG
• Power consumption: 1.8W
• Operating temperature: 0 to 70°C (32 to 158°F)

This series page covers the following verified source length configurations: 1m (3ft) and 3m (10ft). Each documented length-specific OEM reference is treated as its own product configuration; follow the corresponding product link where available. Select the required length when requesting a quotation; custom project lengths are available for discussion.

• QSFP-100G-4SAC01

ACC assemblies use active copper signal conditioning to extend practical copper-link reach while retaining a direct-attach installation. They suit high-density switch and accelerator connections where the host supports the stated active-cable type and power requirement.

The QSFP28 to 4x SFP28 interface and 100G data rate must match the equipment at both ends. The source application is listed as 100G/25G Ethernet. For breakout versions, confirm the lane mapping and the speed of every downstream port; matching connector shapes alone does not establish interoperability.

The assembly is configured for equipment that recognizes the QSFP-100G-4SAC series. Before shipment, we check connector identification, link establishment and electrical link stability, signal integrity and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the switch, server or accelerator model and software release for a pre-order compatibility review.

When ordering, specify QSFP-100G-4SAC, the host platform and one of the covered configurations: 1m (3ft) and 3m (10ft). If your purchase documentation uses any of the listed OEM part numbers, include that identifier as well so our team can verify the intended version before production.

Every ACC assembly undergoes continuity and link testing, compatibility verification and a visual inspection of both connector ends. Cables are coiled without exceeding their minimum bend radius, fitted with connector protection and packed in anti-static bags or protective trays before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.