Broadcom QSFP-200G-4SPC Compatible 200G QSFP56 4 x 50G PAM4 to 4 x 50G SFP56 50G PAM4 Passive Copper Breakout Cable

Built for hosts that recognize QSFP-200G-4SPC, this HT-manufactured QSFP56 to 4x SFP56 DAC assembly delivers 200G direct-attach connectivity. It combines the connector ends and cable into one tested assembly, with 3m (10ft) covered by this series page.

Series Part Number: QSFP-200G-4SPCHT Part Number: QSFP-200G-4SPC

Product Highlights

• HT-manufactured compatible alternative for Broadcom QSFP-200G-4SPC
• 200G aggregate connectivity at 200Gbps
• Interface configuration: QSFP56 to 4x SFP56
• Passive Breakout DAC / Copper
• Length configurations covered: 3m (10ft)
• Conductor specification: 26AWG
• Power consumption: 0.1W (QSFP56 End)0.1W (SFP56 Per End)

This series page covers the following verified source length configurations: 3m (10ft). Each documented length-specific OEM reference is treated as its own product configuration; follow the corresponding product link where available. Select the required length when requesting a quotation; custom project lengths are available for discussion.

• QSFP-200G-4SPC03

Passive DAC assemblies are normally used for short switch-to-switch, switch-to-server and rack-adjacent links. They draw very little power and avoid separate optical components, but the selected length must remain within the host and cable specification.

The QSFP56 to 4x SFP56 interface and 200G data rate must match the equipment at both ends. For breakout versions, confirm the lane mapping and the speed of every downstream port; matching connector shapes alone does not establish interoperability.

The assembly is configured for equipment that recognizes the QSFP-200G-4SPC series. Before shipment, we check connector identification, link establishment and electrical link stability, signal integrity and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the switch, server or accelerator model and software release for a pre-order compatibility review.

This series is ordered by the base HT part number QSFP-200G-4SPC plus length and compatibility requirement. Available source configurations documented on this page are 3m (10ft); other project lengths can be discussed with the factory, and each length-specific OEM reference is reviewed under its own product configuration.

Every DAC assembly undergoes continuity and link testing, compatibility verification and a visual inspection of both connector ends. Cables are coiled without exceeding their minimum bend radius, fitted with connector protection and packed in anti-static bags or protective trays before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.