Broadcom QSFP-400G-AE Compatible 400G QSFP112 4 x 100G PAM4 Active Electrical Cable

Use this AEC cable where a 400G link is required between compatible QSFP112 to QSFP112 ports. This HT version corresponds to Broadcom QSFP-400G-AE and covers 1m (3ft) and 3m (10ft); electrical or optical construction follows the AEC specification rather than a detachable transceiver-and-patch-cord arrangement.

Series Part Number: QSFP-400G-AEHT Part Number: QSFP-400G-AE

Product Highlights

• HT-manufactured compatible alternative for Broadcom QSFP-400G-AE
• 400G aggregate connectivity at 400Gbps
• Interface configuration: QSFP112 to QSFP112
• Active DAC (AEC) / Copper
• Length configurations covered: 1m (3ft) and 3m (10ft)
• Conductor specification: 32AWG
• Power consumption: <8W Per End

This series page covers the following verified source length configurations: 1m (3ft) and 3m (10ft). Each documented length-specific OEM reference is treated as its own product configuration; follow the corresponding product link where available. Select the required length when requesting a quotation; custom project lengths are available for discussion.

• QSFP-400G-AE01

AEC assemblies are intended for high-speed electrical links that require active signal recovery or retiming. Confirm host support, per-end power consumption and airflow, and keep both ends on the interface and breakout configuration stated in the specifications.

The QSFP112 to QSFP112 interface and 400G data rate must match the equipment at both ends. For breakout versions, confirm the lane mapping and the speed of every downstream port; matching connector shapes alone does not establish interoperability.

The assembly is configured for equipment that recognizes the QSFP-400G-AE series. Before shipment, we check connector identification, link establishment and electrical link stability, signal integrity and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the switch, server or accelerator model and software release for a pre-order compatibility review.

Quote HT part number QSFP-400G-AE, the required length from 1m (3ft) and 3m (10ft), and the OEM part number used by your equipment. The length-specific OEM identifiers above identify the exact product configurations so each reference can be reviewed and ordered separately.

Every AEC assembly undergoes continuity and link testing, compatibility verification and a visual inspection of both connector ends. Cables are coiled without exceeding their minimum bend radius, fitted with connector protection and packed in anti-static bags or protective trays before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.