H3C QSFP-40G-D-AOC-15M Compatible 40G QSFP+ Active Optical Cable, 15m (49ft)

For short, high-density connections, this AOC cable combines 40G performance with a fixed 15m (49ft) cable run. It corresponds to H3C QSFP-40G-D-AOC-15M and uses a factory-terminated active optical link with the optical engines and fiber integrated into the assembly.

OEM Part Number: QSFP-40G-D-AOC-15MHT Part Number: QSFP-40G-D-AOC-15M

Product Highlights

• Compatible alternative to H3C QSFP-40G-D-AOC-15M
• 40G connectivity at 40Gbps
• Interface configuration: QSFP+ to QSFP+
• Fixed length and part number: 15m (49ft), QSFP-40G-D-AOC-15M
• Minimum bend radius: 30mm

This assembly uses OFNP jacket, minimum bend radius 30mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

QSFP-40G-D-AOC-15M occupies the middle of this family between QSFP-40G-D-AOC-10M at 10m (33ft) and QSFP-40G-D-AOC-20M at 20m (66ft). It adds 5m over the shorter option for extra routing clearance, while the next longer version adds another 5m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include 10G/40Gigabit Ethernet or Fibre Channel. Confirm that the host firmware and port configuration support the same operating mode.

The optical engines and fiber are permanently integrated into this AOC. There are no detachable optical modules to clean or exchange. Handle the complete assembly by its connector housings and cable, and keep both ends matched to the same interface specification.

The extended 15m (49ft) reach supports connections across adjacent racks or between separated equipment rows. Secure the cable along its route, protect both ends from pull loads and preserve ventilation. The integrated AOC construction avoids a chain of separate modules and patch leads.

The HT cable carries the compatibility configuration associated with QSFP-40G-D-AOC-15M, while its mechanical assembly remains the fixed 15m (49ft) version described here. Incoming inspection, connector examination and a live link test are completed before packing. Customers with unusually old or new H3C software can request a pre-order check.

This product is ordered as QSFP-40G-D-AOC-15M in 15m (49ft). Include the equipment model and software release if you would like a pre-order compatibility review. Other lengths use different part numbers and should not be substituted into the same order line.

Every QSFP-40G-D-AOC-15M compatible assembly undergoes link testing, compatibility verification and visual inspection. The 15m (49ft) cable is coiled without exceeding its minimum bend radius, fitted with connector protection and packed in an anti-static bag or protective tray before cartoning. Project labels and packing lists are available for volume orders.

Lead time for ordinary configurations is normally one to three working days, while production quantities are confirmed with the order. We can arrange express courier or economy freight according to destination and carton volume, or hand the shipment to your appointed logistics provider.