QSFP-DD-400G-ACC-3M10FT 400G QSFP-DD 8 x 50G PAM4 Active Copper Twinax Cable, 3m (10ft)

For short, high-density connections, this ACC cable combines 400G performance with a fixed 3m (10ft) cable run. It corresponds to Generic QSFP-DD-400G-ACC-3M10FT and uses an actively conditioned copper link for the stated high-speed interface.

OEM Part Number: QSFP-DD-400G-ACC-3M10FTHT Part Number: QSFP-DD-400G-ACC-3M10FT

Product Highlights

• HT-manufactured ACC assembly in 3m (10ft)
• 400G connectivity at 425Gbps
• Interface configuration: QSFP-DD
• Fixed length and part number: 3m (10ft), QSFP-DD-400G-ACC-3M10FT
• Cable construction: Active Twinax
• Conductor specification: 30AWG
• Maximum power consumption: 2.5W Per End
• Minimum bend radius: 70mm

The rated power consumption is 2.5W Per End. Include this load in the host-port power and thermal budget, especially in densely populated switches. Maintain front-panel clearance and do not bundle the cable so tightly that it obstructs airflow around the connectors.

QSFP-DD-400G-ACC-3M10FT occupies the middle of this family between QSFP-DD-400G-ACC-2M7FT at 2m (7ft) and QSFP-DD-400G-ACC-5M16FT at 5m (16ft). It adds 1m over the shorter option for extra routing clearance, while the next longer version adds another 2m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

This assembly uses 30AWG conductors, PVC jacket, minimum bend radius 70mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include QSFP-DD MSA, SFF-8636. Confirm that the host firmware and port configuration support the same operating mode.

At 3m (10ft), this assembly can bridge non-aligned ports or adjacent racks while remaining a single direct-attach link. Support longer horizontal runs with suitable cable management and preserve space for cooling and future maintenance.

Our compatibility setup for Generic QSFP-DD-400G-ACC-3M10FT is checked together with the physical 3m (10ft) assembly. Factory verification covers connector condition, host identification, error-free link establishment and electrical continuity, link stability and diagnostic readouts. Providing the exact host model and firmware release helps us identify platform-specific requirements before production.

Use part number QSFP-DD-400G-ACC-3M10FT for the 3m (10ft) assembly. For mixed-length projects, list each required part number and quantity separately so that every cable can be tested and packed according to its intended installation.

Every QSFP-DD-400G-ACC-3M10FT compatible assembly undergoes link testing, compatibility verification and visual inspection. The 3m (10ft) cable is coiled without exceeding its minimum bend radius, fitted with connector protection and packed in an anti-static bag or protective tray before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.