QSFP-DD to 2x 100G QSFP28-200G-AOC-25M82FT 200G QSFP-DD 8 x 25G NRZ to 2 x 100G QSFP28 4 x 25G NRZ Active Optical Breakout Cable, 25m (82ft)

For short, high-density connections, this AOC cable combines 200G performance with a fixed 25m (82ft) cable run. It corresponds to Generic QSFP-DD to 2x 100G QSFP28-200G-AOC-25M82FT and uses a factory-terminated active optical link with the optical engines and fiber integrated into the assembly.

OEM Part Number: QSFP-DD to 2x 100G QSFP28-200G-AOC-25M82FTHT Part Number: QSFP-DD to 2x 100G QSFP28-200G-AOC-25M82FT

Product Highlights

• HT-manufactured AOC assembly in 25m (82ft)
• 200G connectivity at 200Gbps
• Interface configuration: QSFP-DD to 2x 100G QSFP28
• Fixed length and part number: 25m (82ft), QSFP-DD to 2x 100G QSFP28-200G-AOC-25M82FT
• Cable construction: OM3
• Maximum power consumption: 4W (QSFP-DD End) 2.5W (QSFP28 Per End)
• Minimum bend radius: 30mm
• Operating temperature: 0 to 70°C (32 to 158°F)

The listed modulation format is NRZ. Both host interfaces must be configured for the same aggregate rate and lane arrangement. A connector that fits mechanically does not by itself guarantee that the remote port supports this encoding or breakout mode.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include QSFP-DD MSA V5.0, QSFP28 MSA, CMIS V4.0, SFF-8636. Confirm that the host firmware and port configuration support the same operating mode.

The QSFP-DD to 2x 100G QSFP28 configuration divides the high-speed interface into multiple lower-speed connections. Verify the upstream lane assignment, downstream port speeds and breakout setting on the host before connecting the assembly. Each branch must attach to the correct remote interface.

The optical engines and fiber are permanently integrated into this AOC. There are no detachable optical modules to clean or exchange. Handle the complete assembly by its connector housings and cable, and keep both ends matched to the same interface specification.

The extended 25m (82ft) reach supports connections across adjacent racks or between separated equipment rows. Secure the cable along its route, protect both ends from pull loads and preserve ventilation. The integrated AOC construction avoids a chain of separate modules and patch leads.

QSFP-DD to 2x 100G QSFP28-200G-AOC-25M82FT occupies the middle of this family between QSFP-DD to 2x 100G QSFP28-200G-AOC-20M66FT at 20m (66ft) and QSFP-DD to 2x 100G QSFP28-200G-AOC-30M98FT at 30m (98ft). It adds 5m over the shorter option for extra routing clearance, while the next longer version adds another 5m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

The rated power consumption is 4W (QSFP-DD End) 2.5W (QSFP28 Per End). Include this load in the host-port power and thermal budget, especially in densely populated switches. Maintain front-panel clearance and do not bundle the cable so tightly that it obstructs airflow around the connectors.

This assembly uses OFNP jacket, minimum bend radius 30mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

Compatibility is more than matching the QSFP-DD to 2x 100G QSFP28 shape. This assembly is prepared for hosts expecting QSFP-DD to 2x 100G QSFP28-200G-AOC-25M82FT and is checked for identification, stable link behavior and optical link operation, receive activity and diagnostic readouts. We recommend confirming the equipment model and software release for critical deployments or mixed-vendor installations.

This product is ordered as QSFP-DD to 2x 100G QSFP28-200G-AOC-25M82FT in 25m (82ft). Include the equipment model and software release if you would like a pre-order compatibility review. Other lengths use different part numbers and should not be substituted into the same order line.

Before packing, our team checks the cable jacket, connector boots, latches and identification of each assembly. The cable is then secured in a loose coil and protected against dust and connector impact. Neutral packaging, customer part-number labels and project-specific carton lists can be supplied on request.

Stock items are generally dispatched within one to three working days after order confirmation. DHL, UPS, FedEx, TNT and EMS are available for international delivery; larger consolidated orders can move by air or sea freight. Customer courier accounts and nominated forwarders are accepted.