QSFP-DD to QSFP-DD-800G-ACC-1.5M5FT 800G QSFP-DD 8 x 100G PAM4 Active Copper Twinax Cable, 1.5m (5ft)

With a fixed 1.5m (5ft) cable and QSFP-DD to QSFP-DD, the QSFP-DD to QSFP-DD-800G-ACC-1.5M5FT compatible assembly simplifies 800G deployment. It is manufactured and tested by HT for multi-vendor equipment.

OEM Part Number: QSFP-DD to QSFP-DD-800G-ACC-1.5M5FTHT Part Number: QSFP-DD to QSFP-DD-800G-ACC-1.5M5FT

Product Highlights

• HT-manufactured ACC assembly in 1.5m (5ft)
• 800G connectivity at 800Gbps
• Interface configuration: QSFP-DD to QSFP-DD
• Fixed length and part number: 1.5m (5ft), QSFP-DD to QSFP-DD-800G-ACC-1.5M5FT
• Cable construction: Active DAC (ACC)
• Conductor specification: 30AWG
• Maximum power consumption: ≤1.2W
• Minimum bend radius: 34.5mm

The listed modulation format is PAM4. Both host interfaces must be configured for the same aggregate rate and lane arrangement. A connector that fits mechanically does not by itself guarantee that the remote port supports this encoding or breakout mode.

This assembly uses 30AWG conductors, PVC (OFNR) jacket, minimum bend radius 34.5mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include QSFP-DD MSA Rev. 5.0, CMIS Rev 4.0, SFF 8417, IEEE 802.3ck. Confirm that the host firmware and port configuration support the same operating mode.

The additional half metre beyond a one-metre assembly gives QSFP-DD to QSFP-DD-800G-ACC-1.5M5FT useful routing flexibility when the ports are not directly aligned. It can accommodate a different rack unit or a short service loop, but excess cable should be dressed loosely rather than folded into a tight coil.

QSFP-DD to QSFP-DD-800G-ACC-1.5M5FT occupies the middle of this family between QSFP-DD to QSFP-DD-800G-ACC-1M3FT at 1m (3ft) and QSFP-DD to QSFP-DD-800G-ACC-2M7FT at 2m (7ft). It adds 0.5m over the shorter option for extra routing clearance, while the next longer version adds another 0.5m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

The rated power consumption is ≤1.2W. Include this load in the host-port power and thermal budget, especially in densely populated switches. Maintain front-panel clearance and do not bundle the cable so tightly that it obstructs airflow around the connectors.

Our compatibility setup for Generic QSFP-DD to QSFP-DD-800G-ACC-1.5M5FT is checked together with the physical 1.5m (5ft) assembly. Factory verification covers connector condition, host identification, error-free link establishment and electrical continuity, link stability and diagnostic readouts. Providing the exact host model and firmware release helps us identify platform-specific requirements before production.

When ordering, specify QSFP-DD to QSFP-DD-800G-ACC-1.5M5FT, cable length 1.5m (5ft) and the host platform. This allows our team to verify both the physical assembly and the compatibility requirement before production. Neutral labeling and customer packing lists can be arranged for volume orders.

Every QSFP-DD to QSFP-DD-800G-ACC-1.5M5FT compatible assembly undergoes link testing, compatibility verification and visual inspection. The 1.5m (5ft) cable is coiled without exceeding its minimum bend radius, fitted with connector protection and packed in an anti-static bag or protective tray before cartoning. Project labels and packing lists are available for volume orders.

Available stock is usually packed and handed to the carrier within one to three working days. Delivery can be arranged by international express, air cargo or sea freight, with tracking details supplied after dispatch. Freight-collect shipments and delivery to a customer warehouse or forwarder can also be coordinated.