QSFP+ to 4 duplex LC-40G-AOC-30M98FT 40G QSFP+ to 4 Duplex LC Active Optical Breakout Cable, 30m (98ft)

Designed for hosts that recognize QSFP+ to 4 duplex LC-40G-AOC-30M98FT, this QSFP+ to 4 duplex LC cable delivers 40G transmission over a fixed 30m (98ft) assembly. Its AOC construction provides a factory-terminated active optical link with the optical engines and fiber integrated into the assembly.

OEM Part Number: QSFP+ to 4 duplex LC-40G-AOC-30M98FTHT Part Number: QSFP+ to 4 duplex LC-40G-AOC-30M98FT

Product Highlights

• HT-manufactured AOC assembly in 30m (98ft)
• 40G connectivity at 40Gbps
• Interface configuration: QSFP+ to 4 duplex LC
• Fixed length and part number: 30m (98ft), QSFP+ to 4 duplex LC-40G-AOC-30M98FT
• Minimum bend radius: 30mm

This assembly uses OFNP jacket, minimum bend radius 30mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

QSFP+ to 4 duplex LC-40G-AOC-30M98FT is the longest of 5 verified length options in this family. Compared with QSFP+ to 4 duplex LC-40G-AOC-20M66FT at 20m (66ft), it provides 10m of additional reach for a longer vertical drop, a wider rack or an adjacent-cabinet route. Confirm that the complete path requires this length, because unused slack still needs supported, bend-safe storage.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include 10G/40Gigabit Ethernet or Fibre Channel. Confirm that the host firmware and port configuration support the same operating mode.

The QSFP+ to 4 duplex LC configuration divides the high-speed interface into multiple lower-speed connections. Verify the upstream lane assignment, downstream port speeds and breakout setting on the host before connecting the assembly. Each branch must attach to the correct remote interface.

The optical engines and fiber are permanently integrated into this AOC. There are no detachable optical modules to clean or exchange. Handle the complete assembly by its connector housings and cable, and keep both ends matched to the same interface specification.

The extended 30m (98ft) reach supports connections across adjacent racks or between separated equipment rows. Secure the cable along its route, protect both ends from pull loads and preserve ventilation. The integrated AOC construction avoids a chain of separate modules and patch leads.

Each QSFP+ to 4 duplex LC-40G-AOC-30M98FT compatible cable is powered up on a suitable test interface rather than checked only for continuity. We confirm the expected identification and observe optical link operation, receive activity and diagnostic readouts. Because operating systems can apply different qualification rules by hardware revision, the intended Generic platform should be included with the order.

This product is ordered as QSFP+ to 4 duplex LC-40G-AOC-30M98FT in 30m (98ft). Include the equipment model and software release if you would like a pre-order compatibility review. Other lengths use different part numbers and should not be substituted into the same order line.

Production inspection covers both physical condition and a live link check. Connector ends receive individual protection, and the completed assembly is packed without tight ties or sharp bends. For multi-length projects, cartons can be separated and labelled by OEM part number to simplify installation on site.

Lead time for ordinary configurations is normally one to three working days, while production quantities are confirmed with the order. We can arrange express courier or economy freight according to destination and carton volume, or hand the shipment to your appointed logistics provider.