QSFP+ to 4 SFP+-40G-AOC-10M33FT 40G QSFP+ to 4 x 10G SFP+ Active Optical Breakout Cable, 10m (33ft)

With a fixed 10m (33ft) cable and QSFP+ to 4 SFP+, the QSFP+ to 4 SFP+-40G-AOC-10M33FT compatible assembly simplifies 40G deployment. It is manufactured and tested by HT for multi-vendor equipment.

OEM Part Number: QSFP+ to 4 SFP+-40G-AOC-10M33FTHT Part Number: QSFP+ to 4 SFP+-40G-AOC-10M33FT

Product Highlights

• HT-manufactured AOC assembly in 10m (33ft)
• 40G connectivity at 40Gbps
• Interface configuration: QSFP+ to 4 SFP+
• Fixed length and part number: 10m (33ft), QSFP+ to 4 SFP+-40G-AOC-10M33FT
• Minimum bend radius: 30mm

This assembly uses OFNP jacket, minimum bend radius 30mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

QSFP+ to 4 SFP+-40G-AOC-10M33FT occupies the middle of this family between QSFP+ to 4 SFP+-40G-AOC-7M23FT at 7m (23ft) and QSFP+ to 4 SFP+-40G-AOC-15M49FT at 15m (49ft). It adds 3m over the shorter option for extra routing clearance, while the next longer version adds another 5m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include 10G/40Gigabit Ethernet or Fibre Channel. Confirm that the host firmware and port configuration support the same operating mode.

The QSFP+ to 4 SFP+ configuration divides the high-speed interface into multiple lower-speed connections. Verify the upstream lane assignment, downstream port speeds and breakout setting on the host before connecting the assembly. Each branch must attach to the correct remote interface.

The optical engines and fiber are permanently integrated into this AOC. There are no detachable optical modules to clean or exchange. Handle the complete assembly by its connector housings and cable, and keep both ends matched to the same interface specification.

The extended 10m (33ft) reach supports connections across adjacent racks or between separated equipment rows. Secure the cable along its route, protect both ends from pull loads and preserve ventilation. The integrated AOC construction avoids a chain of separate modules and patch leads.

Our compatibility setup for Generic QSFP+ to 4 SFP+-40G-AOC-10M33FT is checked together with the physical 10m (33ft) assembly. Factory verification covers connector condition, host identification, error-free link establishment and optical link operation, receive activity and diagnostic readouts. Providing the exact host model and firmware release helps us identify platform-specific requirements before production.

Use part number QSFP+ to 4 SFP+-40G-AOC-10M33FT for the 10m (33ft) assembly. For mixed-length projects, list each required part number and quantity separately so that every cable can be tested and packed according to its intended installation.

HT inspects and tests every completed cable before it enters finished stock. Protective caps or covers are fitted where applicable, followed by anti-static or tray packaging and an outer carton. Custom labels can cross-reference the customer part number, QSFP+ to 4 SFP+-40G-AOC-10M33FT and the 10m (33ft) length for easier inventory control.

Stock items are generally dispatched within one to three working days after order confirmation. DHL, UPS, FedEx, TNT and EMS are available for international delivery; larger consolidated orders can move by air or sea freight. Customer courier accounts and nominated forwarders are accepted.