QSFP+ to QSFP+-40G-ACC-10M33FT 40G QSFP+ Active Copper Cable, 10m (33ft)

With a fixed 10m (33ft) cable and QSFP+ to QSFP+, the QSFP+ to QSFP+-40G-ACC-10M33FT compatible assembly simplifies 40G deployment. It is manufactured and tested by HT for multi-vendor equipment.

OEM Part Number: QSFP+ to QSFP+-40G-ACC-10M33FTHT Part Number: QSFP+ to QSFP+-40G-ACC-10M33FT

Product Highlights

• HT-manufactured ACC assembly in 10m (33ft)
• 40G connectivity at 40Gbps
• Interface configuration: QSFP+ to QSFP+
• Fixed length and part number: 10m (33ft), QSFP+ to QSFP+-40G-ACC-10M33FT
• Conductor specification: 26AWG
• Minimum bend radius: 40mm

This assembly uses 26AWG conductors, PVC (OFNR) jacket, minimum bend radius 40mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The extended 10m (33ft) reach supports connections across adjacent racks or between separated equipment rows. Secure the cable along its route, protect both ends from pull loads and preserve ventilation. The integrated ACC construction avoids a chain of separate modules and patch leads.

QSFP+ to QSFP+-40G-ACC-10M33FT is the longest of 2 verified length options in this family. Compared with QSFP-40G-AC-7M23FT at 7m (23ft), it provides 3m of additional reach for a longer vertical drop, a wider rack or an adjacent-cabinet route. Confirm that the complete path requires this length, because unused slack still needs supported, bend-safe storage.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include 40G InfiniBand 8x DDR, 4x QDR, 10G/40Gigabit Ethernet, Fibre Channel. Confirm that the host firmware and port configuration support the same operating mode.

Each QSFP+ to QSFP+-40G-ACC-10M33FT compatible cable is powered up on a suitable test interface rather than checked only for continuity. We confirm the expected identification and observe electrical continuity, link stability and diagnostic readouts. Because operating systems can apply different qualification rules by hardware revision, the intended Generic platform should be included with the order.

Quote HT part number QSFP+ to QSFP+-40G-ACC-10M33FT with the required quantity. The 10m (33ft) length is fixed for this part number; if a different length is needed, select its corresponding page and OEM reference from the length list above. Standard HT labels and project-specific packaging are available.

Every QSFP+ to QSFP+-40G-ACC-10M33FT compatible assembly undergoes link testing, compatibility verification and visual inspection. The 10m (33ft) cable is coiled without exceeding its minimum bend radius, fitted with connector protection and packed in an anti-static bag or protective tray before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.