QSFP+ to QSFP+-High-Speed-AOC-20M66FT 56G QSFP+ Active Optical Cable, 20m (66ft)

For short, high-density connections, this AOC cable combines High-Speed performance with a fixed 20m (66ft) cable run. It corresponds to Generic QSFP+ to QSFP+-High-Speed-AOC-20M66FT and uses a factory-terminated active optical link with the optical engines and fiber integrated into the assembly.

OEM Part Number: QSFP+ to QSFP+-High-Speed-AOC-20M66FTHT Part Number: QSFP+ to QSFP+-High-Speed-AOC-20M66FT

Product Highlights

• HT-manufactured AOC assembly in 20m (66ft)
• High-Speed connectivity at FDR 56Gbps
• Interface configuration: QSFP+ to QSFP+
• Fixed length and part number: 20m (66ft), QSFP+ to QSFP+-High-Speed-AOC-20M66FT
• Minimum bend radius: 30mm

This assembly uses OFNP jacket, minimum bend radius 30mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

QSFP+ to QSFP+-High-Speed-AOC-20M66FT occupies the middle of this family between QSFP+ to QSFP+-High-Speed-AOC-15M49FT at 15m (49ft) and QSFP+ to QSFP+-High-Speed-AOC-25M82FT at 25m (82ft). It adds 5m over the shorter option for extra routing clearance, while the next longer version adds another 5m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include 56G InfiniBand , 4x FDR, Fibre Channel. Confirm that the host firmware and port configuration support the same operating mode.

The optical engines and fiber are permanently integrated into this AOC. There are no detachable optical modules to clean or exchange. Handle the complete assembly by its connector housings and cable, and keep both ends matched to the same interface specification.

The extended 20m (66ft) reach supports connections across adjacent racks or between separated equipment rows. Secure the cable along its route, protect both ends from pull loads and preserve ventilation. The integrated AOC construction avoids a chain of separate modules and patch leads.

The HT cable carries the compatibility configuration associated with QSFP+ to QSFP+-High-Speed-AOC-20M66FT, while its mechanical assembly remains the fixed 20m (66ft) version described here. Incoming inspection, connector examination and a live link test are completed before packing. Customers with unusually old or new Generic software can request a pre-order check.

This product is ordered as QSFP+ to QSFP+-High-Speed-AOC-20M66FT in 20m (66ft). Include the equipment model and software release if you would like a pre-order compatibility review. Other lengths use different part numbers and should not be substituted into the same order line.

Production inspection covers both physical condition and a live link check. Connector ends receive individual protection, and the completed assembly is packed without tight ties or sharp bends. For multi-length projects, cartons can be separated and labelled by OEM part number to simplify installation on site.

Lead time for ordinary configurations is normally one to three working days, while production quantities are confirmed with the order. We can arrange express courier or economy freight according to destination and carton volume, or hand the shipment to your appointed logistics provider.