QSFP+ to QSFP+-High-Speed-AOC-3M10FT 56G QSFP+ Active Optical Cable, 3m (10ft)

For short, high-density connections, this AOC cable combines High-Speed performance with a fixed 3m (10ft) cable run. It corresponds to Generic QSFP+ to QSFP+-High-Speed-AOC-3M10FT and uses a factory-terminated active optical link with the optical engines and fiber integrated into the assembly.

OEM Part Number: QSFP+ to QSFP+-High-Speed-AOC-3M10FTHT Part Number: QSFP+ to QSFP+-High-Speed-AOC-3M10FT

Product Highlights

• HT-manufactured AOC assembly in 3m (10ft)
• High-Speed connectivity at FDR 56Gbps
• Interface configuration: QSFP+ to QSFP+
• Fixed length and part number: 3m (10ft), QSFP+ to QSFP+-High-Speed-AOC-3M10FT
• Minimum bend radius: 30mm

This assembly uses OFNP jacket, minimum bend radius 30mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

QSFP+ to QSFP+-High-Speed-AOC-3M10FT occupies the middle of this family between QSFP+ to QSFP+-High-Speed-AOC-2M7FT at 2m (7ft) and QSFP+ to QSFP+-High-Speed-AOC-5M16FT at 5m (16ft). It adds 1m over the shorter option for extra routing clearance, while the next longer version adds another 2m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include 56G InfiniBand , 4x FDR, Fibre Channel. Confirm that the host firmware and port configuration support the same operating mode.

The optical engines and fiber are permanently integrated into this AOC. There are no detachable optical modules to clean or exchange. Handle the complete assembly by its connector housings and cable, and keep both ends matched to the same interface specification.

At 3m (10ft), this assembly can bridge non-aligned ports or adjacent racks while remaining a single direct-attach link. Support longer horizontal runs with suitable cable management and preserve space for cooling and future maintenance.

The assembly is configured for equipment that recognizes QSFP+ to QSFP+-High-Speed-AOC-3M10FT. Before shipment, we inspect both connectors and verify identification, link establishment and optical link operation, receive activity and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the equipment model and software release for a pre-order compatibility review.

When ordering, specify QSFP+ to QSFP+-High-Speed-AOC-3M10FT, cable length 3m (10ft) and the host platform. This allows our team to verify both the physical assembly and the compatibility requirement before production. Neutral labeling and customer packing lists can be arranged for volume orders.

HT inspects and tests every completed cable before it enters finished stock. Protective caps or covers are fitted where applicable, followed by anti-static or tray packaging and an outer carton. Custom labels can cross-reference the customer part number, QSFP+ to QSFP+-High-Speed-AOC-3M10FT and the 3m (10ft) length for easier inventory control.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.