QSFP56 to QSFP56-200G-ACC-4M13FT 200G QSFP56 4 x 50G PAM4 Active Copper Twinax Cable, 4m (13ft)

The HT-manufactured QSFP56 to QSFP56-200G-ACC-4M13FT compatible cable provides 200G connectivity for multi-vendor equipment. This 4m (13ft) version is an actively conditioned copper link for the stated high-speed interface, with an exact part number and length that can be matched directly to the equipment requirement.

OEM Part Number: QSFP56 to QSFP56-200G-ACC-4M13FTHT Part Number: QSFP56 to QSFP56-200G-ACC-4M13FT

Product Highlights

• HT-manufactured ACC assembly in 4m (13ft)
• 200G connectivity at 200Gbps
• Interface configuration: QSFP56 to QSFP56
• Fixed length and part number: 4m (13ft), QSFP56 to QSFP56-200G-ACC-4M13FT
• Cable construction: Active Twinax
• Conductor specification: 28AWG
• Maximum power consumption: 1.5W Per End
• Minimum bend radius: 40mm

The rated power consumption is 1.5W Per End. Include this load in the host-port power and thermal budget, especially in densely populated switches. Maintain front-panel clearance and do not bundle the cable so tightly that it obstructs airflow around the connectors.

This assembly uses 28AWG conductors, PVC (OFNR) jacket, minimum bend radius 40mm. These mechanical characteristics affect how the cable should be dressed behind the equipment. Avoid sharp edges, excessive ties and repeated tight bends close to the connector boots.

The intended application is determined by the host interface and protocol support. Listed interface and protocol references include IEEE 802.3cd, SFF-8665, SFF-8679, SFF-8636. Confirm that the host firmware and port configuration support the same operating mode.

The 4m (13ft) length gives QSFP56 to QSFP56-200G-ACC-4M13FT more freedom for adjacent-rack and row-end deployments. Longer copper runs need particular attention to routing weight and bend control; the ACC specification and host support must still match the intended link.

QSFP56 to QSFP56-200G-ACC-4M13FT occupies the middle of this family between QSFP56 to QSFP56-200G-ACC-3M10FT at 3m (10ft) and QSFP56 to QSFP56-200G-ACC-5M16FT at 5m (16ft). It adds 1m over the shorter option for extra routing clearance, while the next longer version adds another 1m. Measure the managed path and choose this version when its reach is sufficient without creating the slack associated with the longer assembly.

Compatibility is more than matching the QSFP56 to QSFP56 shape. This assembly is prepared for hosts expecting QSFP56 to QSFP56-200G-ACC-4M13FT and is checked for identification, stable link behavior and electrical continuity, link stability and diagnostic readouts. We recommend confirming the equipment model and software release for critical deployments or mixed-vendor installations.

This product is ordered as QSFP56 to QSFP56-200G-ACC-4M13FT in 4m (13ft). Include the equipment model and software release if you would like a pre-order compatibility review. Other lengths use different part numbers and should not be substituted into the same order line.

Production inspection covers both physical condition and a live link check. Connector ends receive individual protection, and the completed assembly is packed without tight ties or sharp bends. For multi-length projects, cartons can be separated and labelled by OEM part number to simplify installation on site.

Stock items are generally dispatched within one to three working days after order confirmation. DHL, UPS, FedEx, TNT and EMS are available for international delivery; larger consolidated orders can move by air or sea freight. Customer courier accounts and nominated forwarders are accepted.