SC UPC to SC UPC Duplex OM2 Fiber Patch Cable

High-density designs should assess this item together with panel access, cable routing and the complete optical loss allowance. This OM2 fiber patch cable carries a SC UPC interface on one end and a SC UPC interface on the other, factory terminated on OM2 glass and optically tested as a full product. The duplex zipcord structure keeps the transmit and receive strands paired in one product for fast, error-free patching.

Product Highlights

• Bend Insensitive Fiber with 7.5mm Min. Bend Radius
• Precision Zirconia Ferrule Connectors Ensure Low Loss
• Flame-Retardant Riser (OFNR) for Vertical and Floor-to-Floor Installations
• Color-Coded Cable Jacket for Easy Identification
• Duplex Zipcord Construction Reduces Risk of Damage from Crimping

When a legacy channel fails, the specified repair is a cord that matches the existing fiber grade. Patching OM1 with OM3 introduces a core-size transition that adds unpredictable loss; consequently, keeping a small stock of the right legacy jumpers is cheaper than diagnostics a mismatched one.

OM1 and OM2 cabling remains in service in industrial controls, building automation and older campus networks. This terminated assembly matches that plant: the 62.5/125 or 50/125 core mates correctly with the installed infrastructure, avoiding the modal mismatch that mixing core sizes would create.

Standard cable lengths cover the common patching routes: 1m (3ft), 2m (7ft), 3m (10ft), 5m (16ft), with custom length obtainable beyond the list. Specifying the measured pathway length keeps the slack out of the manager and the strain off these optical interfaces.

Each completed assembly is terminated with precision zirconia ferrule connectors and optically tested before packing: insertion loss and return loss are verified on each cable, and end-face geometry is inspected for consistent physical contact. This optical cable ships with dust caps on both connectors and the test result obtainable on ask for.

Refer to this arrangement by connector pair, fiber mode and length during the request for a quotation. For configurations outside the listed options, mixed connector families, jackets, marking or project packaging, send the requirement with the enquiry and the factory will review the build before manufacturing begins. Project orders can be reviewed for interface compatibility, packing details and delivery coordination.