Juniper Networks SDD-100G-2SPC Compatible 100G SFP-DD 2 x 50G PAM4 to 2 x SFP56 50G PAM4 Passive Copper Twinax Cable

This Juniper Networks SDD-100G-2SPC compatible DAC cable provides 100G connectivity through a SFP-DD to 2x SFP56 interface. It is a passive copper twinax connection without separate optical modules or fiber patch cords. The series configurations covered on this page are 0.5m (2ft).

Series Part Number: SDD-100G-2SPCHT Part Number: SDD-100G-2SPC

Product Highlights

• HT-manufactured compatible alternative for Juniper Networks SDD-100G-2SPC
• 100G aggregate connectivity at 100Gbps
• Interface configuration: SFP-DD to 2x SFP56
• Passive Twinax / Copper
• Length configurations covered: 0.5m (2ft)
• Conductor specification: 30AWG
• Power consumption: 0.1W
• Operating temperature: 0 to 70°C (32 to 158°F)

This series page covers the following verified source length configurations: 0.5m (2ft). Each documented length-specific OEM reference is treated as its own product configuration; follow the corresponding product link where available. Select the required length when requesting a quotation; custom project lengths are available for discussion.

• SDD-100G-2SPC005

Passive DAC assemblies are normally used for short switch-to-switch, switch-to-server and rack-adjacent links. They draw very little power and avoid separate optical components, but the selected length must remain within the host and cable specification.

The SFP-DD to 2x SFP56 interface and 100G data rate must match the equipment at both ends. The source application is listed as 100G Ethernet, 128G Fibre Channel. For breakout versions, confirm the lane mapping and the speed of every downstream port; matching connector shapes alone does not establish interoperability.

The assembly is configured for equipment that recognizes the SDD-100G-2SPC series. Before shipment, we check connector identification, link establishment and electrical link stability, signal integrity and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the switch, server or accelerator model and software release for a pre-order compatibility review.

When ordering, specify SDD-100G-2SPC, the host platform and one of the covered configurations: 0.5m (2ft). If your purchase documentation uses any of the listed OEM part numbers, include that identifier as well so our team can verify the intended version before production.

Every DAC assembly undergoes continuity and link testing, compatibility verification and a visual inspection of both connector ends. Cables are coiled without exceeding their minimum bend radius, fitted with connector protection and packed in anti-static bags or protective trays before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.