100G SFP-DD 2 x 50G PAM4 to 2 x SFP56 50G PAM4 Passive DAC

The 100G SFP-DD 2 x 50G PAM4 to 2 x SFP56 50G PAM4 Passive DAC, 0.5m (2ft) is a passive twinax direct attach copper cable with SFP-DD to 2x SFP56, supporting 100Gbps links over a length of 0.5m (2ft). As a passive cable it draws essentially no power and adds no latency to the link. It is a cost effective, low latency interconnect for 100G Ethernet data center and enterprise network environments, and complies with SFPDD: SFP-DD MSA, SFP-DD MIS, IEEE 802.3cdSFP56: SFF-8432, SFF-8402, SFF-8472, IEEE 802.3cd.

Product Highlights

• SFP-DD to 2x SFP56
• Data rate: 100Gbps
• Cable type: Passive Twinax
• Length: 4 standard options from 0.5m (2ft) to 3m (10ft)
• Operating temperature: 0 to 70°C (32 to 158°F)

Designed for 100G Ethernet data center and enterprise network environments, the 100G SFP-DD 2 x 50G PAM4 to 2 x SFP56 50G PAM4 Passive DAC, 0.5m (2ft) carries 100Gbps between SFP-DD to 2x SFP56 interfaces. This unit is available in 4 standard lengths from 0.5m (2ft) to 3m (10ft). Because the assembly is factory terminated and tested as a complete link, installation is plug and play on both ends. If your project needs a specific vendor coding or custom label, our production line handles it as a routine step before packing.

Standards compliance covers SFPDD: SFP-DD MSA, SFP-DD MIS, IEEE 802.3cdSFP56: SFF-8432, SFF-8402, SFF-8472, IEEE 802.3cd. The unit works in any equipment with a standard SFP-DD to 2x SFP56 interface; if your network uses a specific vendor's coding, tell us the switch model and we will program and verify it before delivery.

The standard part number of this assembly is SDD-100G-2SPC005. We supply this cable in 0.5m (2ft), 1m (3ft), 2m (7ft) and 3m (10ft). Custom lengths beyond this range can also be produced on request. Wire gauge: 30AWG. Volume pricing is available for project quantities.

Because we are the factory, customization is straightforward: non-standard lengths, different jacket materials, specific polarity or breakout wiring, and compatibility programming for particular switch brands are all routine work for us. Small trial orders are accepted so you can verify quality before scaling up.

Goods are normally sent by courier such as DHL, UPS, FedEx, TNT or EMS; air and sea freight are also available on request. Commonly used items are kept in stock for immediate shipment, and out-of-stock items are usually delivered within a few working days. We can also ship on your courier account or hand goods to your appointed forwarder.

From incoming component inspection to final burn-in, quality is controlled at each step of production. Finished units are verified on real networking equipment in our compatibility lab, and test records are kept per batch so that any field question can be traced back quickly.

Products are first packed into blister trays or self-sealed bags and then into cartons. Standard labels and marks are applied by default, and customized packing and labeling are available on request.