25G SFP28 AOC

The 25G SFP28 AOC, 1m (3ft) connects SFP28 to SFP28 ports at 25Gbps over OM3 multimode fiber at 850nm. Because the optics are built into the cable ends, installation is plug and play with no separate transceivers to manage, and airflow inside the rack stays unobstructed. It is well suited to 25G Ethernet, data center interconnect and 5G transport networks. Standard lengths run from 1m (3ft) to 30m (98ft).

Product Highlights

• SFP28 to SFP28
• Data rate: 25Gbps
• Length: 11 standard options from 1m (3ft) to 30m (98ft)
• Operating temperature: 0 to 70°C (32 to 158°F)

The 25G SFP28 AOC, 1m (3ft) is a 25Gbps active optical cable for SFP28 to SFP28 connections in 25G Ethernet, data center interconnect and 5G transport networks. This unit is available in 11 standard lengths from 1m (3ft) to 30m (98ft). Because the assembly is factory terminated and tested as a complete link, installation is plug and play on both ends. Compatibility with Cisco systems is verified in our own test lab before shipment, so the unit works out of the box as an equivalent of SFP28-25G-AOC1M.

On the compatibility side, this unit is the practical equivalent of the Cisco part SFP28-25G-AOC1M and works in Cisco systems out of the box. Standards compliance covers industry MSA standards.

The standard part number of this assembly is SFP-25G-AO01. We supply this cable in 1m (3ft), 2m (7ft), 3m (10ft), 4m (13ft), 5m (16ft), 7m (23ft), 10m (33ft), 15m (49ft), 20m (66ft), 25m (82ft) and 30m (98ft). Custom lengths beyond this range can also be produced on request. Samples for testing can be arranged before bulk orders.

Standard packing is an anti-static bag plus blister protection, with cartons sized to keep products from moving in transit. We apply our standard labels by default; neutral packing or customer-branded labels, part number stickers and serial barcodes are all available on request.

Our product line has grown with the industry for three decades, from GBIC-era modules to today's 800G and 1.6T interconnects. If the exact configuration you need is not listed, we can usually build it: custom lengths, mixed connector breakouts, OEM branding and project-specific firmware coding are all supported.

Standard products are held in stock and usually ship within one to three working days. We dispatch worldwide by DHL, UPS, FedEx, TNT or EMS, and for bulk orders we arrange air or sea freight. Shipments can also be sent collect on your own courier account or delivered to your freight forwarder.

Before any product leaves our factory it goes through optical performance testing, compatibility verification on real switch platforms and a final visual inspection. Our in-house test lab holds a wide range of current and legacy switches from major brands, so interoperability is proven on the actual equipment your network uses rather than assumed from paper specifications.