HPE Aruba SFP-25G-PC Compatible 25G SFP28 Passive Copper Twinax Cable

The SFP-25G-PC compatible cable series is intended for HPE Aruba equipment requiring a 25G DAC connection. Its direct-attach configuration supports a passive copper twinax connection without separate optical modules or fiber patch cords, while the verified source lengths listed below make length selection explicit.

Series Part Number: SFP-25G-PCHT Part Number: SFP-25G-PC

Product Highlights

• HT-manufactured compatible alternative for HPE Aruba SFP-25G-PC
• 25G aggregate connectivity at 25Gbps
• DAC
• Length configurations covered: 0.5m (2ft) and 1m (3ft)
• Conductor specification: 30AWG

This series page covers the following verified source length configurations: 0.5m (2ft) and 1m (3ft). Each documented length-specific OEM reference is treated as its own product configuration; follow the corresponding product link where available. Select the required length when requesting a quotation; custom project lengths are available for discussion.

• SFP-25G-PC01

Passive DAC assemblies are normally used for short switch-to-switch, switch-to-server and rack-adjacent links. They draw very little power and avoid separate optical components, but the selected length must remain within the host and cable specification.

The the stated connector configuration interface and 25G data rate must match the equipment at both ends. The source application is listed as 25G Ethernet, Data Center, 5G Wireless. For breakout versions, confirm the lane mapping and the speed of every downstream port; matching connector shapes alone does not establish interoperability.

The assembly is configured for equipment that recognizes the SFP-25G-PC series. Before shipment, we check connector identification, link establishment and electrical link stability, signal integrity and diagnostic readouts. Host hardware and firmware revisions can affect third-party cable acceptance, so customers can provide the switch, server or accelerator model and software release for a pre-order compatibility review.

Quote HT part number SFP-25G-PC, the required length from 0.5m (2ft) and 1m (3ft), and the OEM part number used by your equipment. The length-specific OEM identifiers above identify the exact product configurations so each reference can be reviewed and ordered separately.

Every DAC assembly undergoes continuity and link testing, compatibility verification and a visual inspection of both connector ends. Cables are coiled without exceeding their minimum bend radius, fitted with connector protection and packed in anti-static bags or protective trays before cartoning. Project labels and packing lists are available for volume orders.

Standard configurations normally ship within one to three working days. Worldwide courier, air freight and sea freight options are available, and shipments can also be sent on your own courier account or delivered to an appointed forwarder.